Sharp PG-A10X-A, Руководство по эксплуатации

Страница: 48 / 74

-44
You can use the “Options” menu to enhance the usage for the projector. For operation of the
menu screen, see pages
32 to 35 .
Example: “Options” menu screen for
INPUT 2 (S-Video) mode
Lamp Timer (Life)
(Check-
ing the Lamp Life Status)
You can confirm the cumulative lamp usage time
and the remaining lamp life (percentage).
Display the “Options” menu to check the
lamp life status.
Description of Lamp Life
Note
• It is recommended that the lamp be changed
when the remaining lamp life becomes 5%.
For lamp replacement, contact your nearest
Sharp Authorized Projector Dealer or Service
Center.
• The table above indicates rough estimates in the
case of using only in each mode shown. Remain-
ing lamp life changes within the range of the val-
ues shown depending on the frequency at which
“Eco Mode” is switched to “
” (Eco mode) and
“ ” (Standard mode) (see page 45 ).
Using the “Options” Menu
Lamp usage condition
Operated exclusively
in Eco mode (
)
Operated exclusively
in Standard mode (
)
Remaining lamp life
100% 5%
about
4,500 hours
225 hours
about
3,000 hours
150 hours
OSD Display
(Setting On-
screen Display)
This function allows you to turn the on-screen mes-
sages on or off.
Select “ ” (ON) or “ ” (OFF) in “OSD
Display” on the “Options” menu.
Description of “OSD Display” Settings
Description
All On-screen Displays are displayed.
INPUT/VOLUME/AV MUTE/FREEZE/
AUTO SYNC/ENLARGE/ “An invalid
button has been pressed.” / “All buttons on
Projector are locked.” is displayed when
the STANDBY button is pressed while the
Keylock function is active.
Selectable settings
ON
OFF
PG-A15X_E_PDF_P40_50.p65 2004.10.18, 4:25 PM 44