Connections and Setup
-25
When using the default setting.
▼
On-screen Display
The image is reversed.
When using the default setting.
▼
On-screen Display
The image is inverted.
Projecting a Reversed/Inverted Image
Projection from behind the Screen
■
Place a translucent screen between the projector and the
audience.
■
Reverse the image by setting “Rear” in the “PRJ Mode” menu.
See page
50
for use of this function.
Projection Using a Mirror
■
Place a mirror (normal flat type) in front of the lens.
Info
•
When using a mirror, be sure to carefully position both the
projector and the mirror so the light does not shine into the
eyes of the audience.
Ceiling-mount Setup
■
It is recommended that you use the optional Sharp ceiling-
mount bracket for this installation.
Before mounting the projector, contact your nearest Sharp
Authorized Projector Dealer or Service Center to obtain the
recommended ceiling-mount bracket (sold separately).
•
BB-A10T ceiling adaptor, its BB-NVHOLDER280, BB-
NVHOLDER550, BB-NVHOLDER900 ceiling mount
systems (for GERMANY).
•
AN-A10T ceiling-mount bracket, its AN-TK201 and AN-
TK202 extension tubes (for countries other than
GERMANY).
■
Be sure to adjust the position of the
projector to match the distance (H)
from the lens center position (see page
24
) to the lower edge of the image,
when mounting the projector on the
ceiling.
■
Invert the image by setting
“Front” in the
“PRJ Mode” menu. See
page
50
for use of this
function.
PG-A15X_E_PDF_P21_25.p65
10/17/04, 11:37 AM
25
Содержание PG-A10X-A
Страница 74: ...SHARP CORPORATION ...
