Sharp PG-A10X-A, Руководство по эксплуатации

Страница: 14 / 74

-10
26
26
55
55
27
29
39
27
13
52
21
21
ON button
For turning the power on.
28
STANDBY button
For putting the projector into the
standby mode.
Power indicator
Illuminates red when the
projector is in standby.
When the power is turned
on, this indicator will
illuminate green.
Lamp indicator
Illuminates green indicating
normal function. Replace
the lamp when the indicator
illuminates red.
Temperature warning
indicator
When the internal
temperature rises, this
indicator will illuminate red.
Remote control
sensor
53
INPUT button
For switching input mode
1, 2 or 3.
KEYSTONE button
For entering the Keystone
Correction mode.
AUTO SYNC button
For automatically
adjusting images when
connected to a computer.
Volume buttons
For adjusting the speaker
sound level or the
Keystone Correction.
22
Zoom knob
22
Focus ring
Speaker
21
Foot release
21
Front adjustment
foot
Front adjustment foot
Air filter/cooling
fan (Intake vent)
(on the bottom of
the projector)
Exhaust vent
Foot release
(on the side of
the projector)
Numbers in refer to the main pages in this operation manual where the topic is explained.
Projector (Front and Top View)
Part Names
Attaching and removing the lens cap
•
Press on the two buttons of the lens cap
and attach it to the lens, then release the
buttons to lock it in place.
•
Press on the two buttons of the lens cap
and remove it from the lens.
In this operation manual, the illustration and the
screen display are simplified for explanation,
and may differ slightly from actual display.
PG-A15X_E_PDF_P06_14.p65 10/17/04, 11:35 AM 10