MX-M503N MX-PNX6A/B/C/D 10 – 5
4)
Close the front door of punch unit.
5)
Install the fixing screw (Package part No. 4 of MX-FN11) on
rear side.
6)
Install the rear cover of punch unit with the fixing screws.
7)
By using nippers, split the removed connector cover of the fin-
isher along the perforated line.
8)
Install the connector cover of the finisher and fix it with the fix-
ing screw.
G. Connection of connector to the main unit
1)
Connect two connectors of the finisher to the main unit, and
tighten the screws.
H. Punch position label attachment
1)
Attach the punch position label to the position indicated in the
figure.
[For scanner] (Package part No. 11 of the MX-FN11)
Second label
Corner R end fitting
Lose the
clearance.
First label
Label attachment
reference
Corner of the "upper
cabinet rear"
Corner R end fitting
