MX-M503N MX-RBX3 6 – 2
: '10/Jun/18
1
B. Removal of the paper holding plate unit
1)
Disengage the pawl, and remove the paper holding plate and
the paper holding plate holder together as a unit.
* Be careful to remove both of the paper holding plate (which
is easily removed alone) and the paper holding plate holder.
C. Installation of the interface pass unit
1)
Open the front cabinet. Remove the screws, and remove the
front cabinet upper.
2)
Disengage the pawls, and remove the paper exit tray cover.
3)
Remove the screws, and remove the paper exit tray.
* When removing the paper exit tray, there is no need to
remove the screws in the section (A).
4)
Remove the paper exit full detection actuator (A), and install
the reverse detection actuator (B) (package part No. 6).
* Be careful of the installing direction of the reverse detection
actuator.
5)
Engage the projection of the main unit frame with the hole in
the right cover plate (package part No. 1), and install the right
cover plate and fix it with the fixing screw A (package part No.
4).
* Be sure to clamp and fix the paper exit tray shifter side plate
with the fixing guide.
1
1
A
1
A
B
2
B
