Sharp MX-5111N Скачать руководство пользователя страница 67

Страница: 67 / 68

SHARP

DOCUMENT REFERENCE

Operating System Support Reference:

GDI

Graphic Display Interface.

SPLC

Sharp Printer Language Control (GDI).

Sharp Advanced Printing Language (GDI)

PCL

Printer Command Language

Postscript 3

PPD

Postscript Printer Description.

GPD

Generic Printer Description (PCL).

XPS

XML Paper Specification (Page Description Language)

SRDM

Sharp Remote Device Manager



Print Driver / Application / Operation are available and supported.



Windows Vista/2008 or Windows 7 Drivers / Application are supported.

Print Driver / Application / Operation are not available or supported under

Windows OS

Print Driver / Application / Operation are not available or supported under

Apple OSX.

WSUS

Digitally Certified Print Driver is installed automatically using Plug & Play via Windows
Update server.

WHQL

WHQL (Windows Hardware Quality Lab) Digitally Certified Print Driver for specified
Windows Operating System is supported.

01/14

Current Release/Support Schedule - Month/Year [English only].

Note:

Release schedule is subject to change without prior notice.

Useful Links (Web Addresses):

Support Website:

MFP Firmware
Service Documentation
Print Drivers
Utility Software -

www.sharp.net.au

Product Information:

(Document Solution Centre): -

http://training.sharp.net.au/dsc/

Product Key Registration:-

https://dse-pub.sharp.co.jp/key/

User Name:

keyuser

Password:

key000323

Information contained within this guide is subject to change without prior notice.

This Handy Guide is not a substitute for the official Sharp Service manuals.

It is for use by Sharp qualified service technicians with the intention of improving

the efficiency of Sharp MFP Devices.

All the latest fault finding information, firmware and printer drivers

can be found on the

SHARP

Support Website.

Содержание MX-5111N





































































Результаты поиска

Содержание MX-5111N

Отзывы:

Похожие инструкции для MX-5111N

Бренды по названию

Популярные бренды

Sharp MX-5111N, Техническое справочное руководство

Результаты поиска

Содержание MX-5111N

Отзывы:

Похожие инструкции для MX-5111N

Бренды по названию

Популярные бренды