manualshive.com logo in svg

Sharp MX 3501N - Color Laser - Copier, Руководство по обслуживанию

Sharp MX 3501N - цветной лазерный копир. Пользователи могут найти брошюру и технические характеристики владельца для этого продукта, скачав их совершенно бесплатно с manualshive.com. Этот многофункциональный аппарат обеспечит вас всем необходимым, чтобы успешно выполнить любые задачи в офисе.

Поделиться
Скачать
background image

MX3500N  ADJUSTMENTS  6 – 52

(3) Printer color balance/density check

(Note)
Before checking the copy color balance and the density, be sure to
execute the following procedures in advance.
* Execute the high density image correction (process correction)

forcibly. (SIM 44-6)

* Execute the half tone image correction forcibly. (SIM 44-26)
(Procedure)
a. When the PCL mode is supported:
Execute SIM 64-5 to print the print test pattern.
Set each set value to the default and press [EXECUTE] key. The
print test pattern is printed.

The print density must be changed gradually from the lighter level
to the darker level. The density changing direction must not be
reversed. The density level of each color must be almost at the
same level.
b. When the PCL mode is not supported: (In the case of GDI
model)
Use SIM 67-25 to print the color balance adjustment sheet and
compare each process (CMY) black patch color balance and the
black patch to check the color balance.

The print density must be changed gradually from the lighter level
to the darker level. The density changing direction must not be
reversed.
The density level of each color must be almost at the same level.
Patch B may not be copied.
Patch A must not be copied.

 

21-A

Printer color balance adjustment (Auto 
adjustment)

a. General

The color balance adjustment (auto adjustment) is used to adjust
the print density of each color (Cyan, Magenta, Yellow, Black) auto-
matically with SIM 67-24 or the user program.
(When this adjustment is executed, the color balance adjustments
of all the print modes are revised.)

There are following two modes of the automatic color balance
adjustment.
1)

Auto color balance adjustment by the serviceman) (SIM 67-24
I used.)

2)

Auto color balance adjustment by the user (The user program
is used.) (The color balance target becomes the service tar-
get.)
The auto color balance adjustment by the user is provided to
reduce the number of service calls.
If the print color balance is lost for some reasons, the user can
use this color balance adjustment to recover the balance.
When, however, the machine has a fatal problem or when the
machine environment is greatly changed, this function does
not work effectively.
On the other hand, the auto color balance adjustment by the
serviceman functions to recover the normal color balance
though the machine environment is greatly changed. If the
machine has a fatal problem, repair and adjust it for obtaining
the normal color balance.
To perform the adjustment, the above difference must be fully
understood.

b. Note for execution of the color balance adjustment (Auto adjust-
ment)
1)

The copy color balance adjustment must have been completed
properly.

2)

Be sure to use the specified paper for color.

3)

Before execution of the image quality check and the image
quality adjustment, be sure to execute the following correc-
tions forcibly to set the image forming section to the optimum
state.
* Execute the high density image correction (Process correc-

tion) forcibly. (SIM 44-6)

* Execute the half tone image correction forcibly. (SIM 44-26)

c. Adjustment procedure
(Auto color balance adjustment by the serviceman)
1)

Enter the SIM 67-24 mode.

2)

Press [EXECUTE] key. (A3 or 11" x 17" paper is automatically
selected.)
The color patch image (adjustment pattern) is printed out.

Max

A

B

C

D

E

F

G

H

I

J

K

L

M

N

O

C

M

Y

Bk

High density

Low density

Fig. 1 PG image

1) The max. density

section is not blurred.

3) Patch for each of C, M, Y, BK

• The patch density is identical between patches or not reversed.
• The patch density is changed gradually.

2) Patch C or D of each of Y, C, M,

and BK is very slightly copied.

Patch A of each of Y, M,
C, and BK are not copied.

SIMULATION

NO.67-24

TEST

PRINTER ENGINE HALFTONE AUTO ADJUSTMENT MODE

EXECUTE

0

CLOSE

PRESS [EXECUTE] TO PRINT THE TEST PATCH.

(PLEASE USE SPECIFIED TYPE OF A3 OR 11”

˜

17” SIZE PAPER

FOR THIS ADJUSTMENT

Содержание MX 3501N - Color Laser - Copier

































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MX 3501N - Color Laser - Copier

Canon imagePROGRAF iPF8300S Basic Manual preview
imagePROGRAF iPF8300S
Бренд: Canon Страницы: 52
Canon i250 Series Specification preview
i250 Series
Бренд: Canon Страницы: 2
Xerox Phaser 7800 Installation Manual preview
Phaser 7800
Бренд: Xerox Страницы: 2
Xerox Phaser 3600 Voluntary Product Accessibility Template preview
Phaser 3600
Бренд: Xerox Страницы: 11
Xerox CiPress 325 Customer Help Information preview
CiPress 325
Бренд: Xerox Страницы: 192
Xerox Phaser 6100 Instructions Manual preview
Phaser 6100
Бренд: Xerox Страницы: 10
Xerox DocuPrint N24 Function Manual preview
DocuPrint N24
Бренд: Xerox Страницы: 15
Xerox WORKCENTRE 7425 Quick Use Manual preview
WORKCENTRE 7425
Бренд: Xerox Страницы: 88
Xerox PHASER 8560MFP Supplementary Manual preview
PHASER 8560MFP
Бренд: Xerox Страницы: 10
Xerox ColorQube 9203 Quick Manual preview
ColorQube 9203
Бренд: Xerox Страницы: 33
Xerox C123 Copycentre Quick Reference Manual preview
C123 Copycentre
Бренд: Xerox Страницы: 154
Xerox WorkCentre 5845 Installation And Operation Manual preview
WorkCentre 5845
Бренд: Xerox Страницы: 14
Oce im4530 Scanning Manual preview
im4530
Бренд: Oce Страницы: 136
Oce im4512 Facsimile Operation Manual preview
im4512
Бренд: Oce Страницы: 116
Oki MC560 MFP CX2032 Guia Do Usuário preview
MC560 MFP CX2032
Бренд: Oki Страницы: 247
Canon PIXMA MG5522 Manual preview
PIXMA MG5522
Бренд: Canon Страницы: 18
Canon MultiPASS MPC190 Setup Sheet preview
MultiPASS MPC190
Бренд: Canon Страницы: 8
Xerox VersaLink C405/N User Manual preview
VersaLink C405/N
Бренд: Xerox Страницы: 256

Бренды по названию

Популярные бренды

Загрузить еще бренды