Sharp MX 3501N - Color Laser - Copier, Руководство по обслуживанию

Страница: 249 / 448

MX3500N SIMULATION 7 – 141
3) When [EXECUTE] button is pressed, it is highlighted and self-
printing is started.
* Also when [OK], [
↑
], [
↓
], [EXECUTE] button, [COLOR], or
[BLACK] key is pressed, the value is saved to EEPROM and
RAM.
* When [EXECUTE] button is pressed and the self-printing is
completed, [EXECUTE] button returns to the normal display.
* When [C], [CA], [SYSTEM SETTINGS], or [EXECUTE] but-
ton is pressed, self-printing is interrupted.
<Set range and default value of each value>
67-26
Purpose Adjustment
Function (Purpose) Used to set the reference scanner target
value of the printer engine auto density
adjustment of Simulation 67-24.
Compaired to DEF1, DEF2 and DEF3 are
decreased-red color balance target value.
Section Printer
Item Image quality
Operation/Procedure
1) When the machine enters Simulation 67-26, the current set
button of the target value table is highlighted.
2) When the target value button to be changed is pressed, it is
highlighted and the setting is saved to EEPROM and RAM.
* Only one item can be selected.
3) Excute Simulation 67-24.
<Set range and default value of each setup>
67-27
Purpose Adjustment
Function (Purpose) Used to display and register the scanner
target value (for servicing) of the printer
engine auto density adjustment.
Section Printer
Item Registration
Operation/Procedure
1) When the machine enters Simulation 67-27, the following
screen is displayed.
* Use [K][C][M][Y] buttons to display the data of each color.
Only one color button can be selected. The selected button
is highlighted. (In the initial screen, [K](BLACK) is selected.)
2) Press [SETUP] button, and the display is shifted to the sam-
pling start screen.
Place the 16-patch pattern printed with SIM67-25 on the glass
table and press [EXECUTE] button.
[EXECUTE] button is highlighted and the display is shifted to
the sampling screen.
3) After completion of sampling, the display is shifted to the sam-
pling result display screen. Press [REPEAT] button to return to
the sampling start screen.
4) When [OK] button is pressed, the displayed sampling result is
saved to EEPROM and RAM.
5) The display returns to the initial screen, and the registered tar-
get value is displayed.
<Display data content>
* BASE is displayed only on the sampling result display screen.
User request Black Cyan Magenta Yellow
Cyan-rich - (increase) decrease decrease
Magenta-rich - decrease (increase) decrease
Yellowish - decrease decrease (increase)
Reddish - decrease decrease (increase)
Greenish - (increase) decrease (increase)
Blueish - (increase) decrease decrease
Item Item name Set range Default value
A POINT1 1 to 99 50
B POINT2 1 to 99 50
C POINT3 1 to 99 50
D POINT4 1 to 99 50
E POINT5 1 to 99 50
F POINT6 1 to 99 50
G POINT7 1 to 99 50
H POINT8 1 to 99 50
I POINT9 1 to 99 50
J POINT10 1 to 99 50
K POINT11 1 to 99 50
L POINT12 1 to 99 50
M POINT13 1 to 99 50
N POINT14 1 to 99 50
O POINT15 1 to 99 50
CLOSE
0
A:
A 㧦 50
B
㧦
50
C 㧦 50
㧧 POINT1
㧧
POINT2
㧧 POINT3
SIMULATION NO.67-25
PRINTER ENGINE COLOR BALANCE MANUAL ADJUSTMENT 㧦 PG
50
㨇 1 㨪 99 㨉
OK
TEST
K C M
Y
EXECUTE
D 㧦 50 㧧 POINT4
Item content Set value Target setting
Target value table
setting DEF1 Standard adjustment setting
DEF2 5% reduced red setting (Color balance
with slightly strong Cyan)
DEF3 10% reduced red setting (Color
balance with emphasis on Cyan)
Display data Display content
B Point B target value
C Point C target value
D Point D target value
E Point E target value
F Point F target value
G Point G target value
H Point H target value
I Point I target value
J Point J target value
K Point K target value
L Point L target value
M Point M target value
N Point N target value
O Point O target value
BASE Base sampling value
0
DEF1
SIMULATION NO.67-26
TEST
STANDARD SCANNER TARGET SELECT OF PRT ENGINE HALFTONE AUTO ADJ
1/1
TARGET TBL DEF2 DEF3 :
CLOSE