Sharp MX 3501N - Color Laser - Copier, Руководство по обслуживанию

Страница: 186 / 448

MX3500N SIMULATION 7 – 78
46-26
Purpose Adjustment
Function (Purpose) Used to reset the single color mode color
balance set value to the default.
Section Image process (ICU)
Item Adjustment
Operation/Procedure
1) Press [EXECUTE] button.
[EXECUTE] button is highlighted and [YES] and [NO] buttons
become active display.
2) Press [YES] button.
The single color mode color balance set value is reset to the
default value. [YES] button is highlighted.
* When [NO] button or [EXECUTE] button is pressed, [EXE-
CUTE] button returns to the normal display and [YES] and
[NO] buttons gray out.
* After completion of default reset of the single color mode
color balance set value, [EXECUTE] button returns to the
normal display and [YES] and [NO] buttons gray out.
* The restored data are saved to EEPROM and RAM.
<Standard value reset item>
46-27
Purpose Adjustment
Function (Purpose) Used to set the engine gamma calculating
formula coefficient.
Section Image process (ICU)
Item Adjustment
Operation/Procedure
1) Select the set item with [
↑
] and [
↓
] buttons.
The highlighted set value is switched and the value is dis-
played in the setting area.
* If there is any item over [
↑
], an active display is made and
item is shifted.
If there is no item over [
↑
], the display grays out and the
operation is invalid.
If there is any item under [
↓
], an active display is made and
item is shifted.
If there is no item over [
↓
], the display grays out and the
operation is invalid.
2) Enter the set value with 10-key.
* Press [C] key to clear the entered values.
3) When [OK], [
↑
], [
↓
] button, [COLOR], or [BLACK] key is
pressed, the currently entered data are saved to EEPROM and
RAM.
* Copying can be performed also by pressing [COLOR]/[BLACK]
key.
* When [CLOSE] button is pressed, the display is shifted to the
copy basic screen of simulation.
<Set range and default value of each setup>
46-28
Purpose Adjustment
Function (Purpose) (Information on this simulation may be
requested in some cases. However, this
function is basically not used in the market.)
Used to check the auto exposure/Auto doc-
ument recognition/ Line number recognition
(Color mode). If the local memory size is
less than 256MB, the operation of this sim-
ulation may not operate normally.
Section Image process (ICU)
Item Adjustment
Operation/Procedure
1) Press [EXECUTE] button to start scanning. After completion of
scanning, the result is displayed.
2) Press [NEXT] button to switch to the process data of another
category.
Use [
↓
] and [
↑
] keys to change the display page of the process
data.
* If there is a page over [
↑
], an active display is shown and the
page moves up. If there is no page upward, the display
grays out and the operation is invalid.
If there is a page under [
↓
], an active display is shown and
the page moves down. If there is no page downward, the
display grays out and the operation is invalid.
3) Press [SETUP] button to return to the initial screen.
Standard value reset item
1 RED set ratio
2 GREEN set ratio
3 BLUE set ratio
4 YELLOW set ratio
5 MAGENTA set ratio
6 CYAN set ratio
0
SIMULATION NO.46 ̆ 26
TEST
SINGLE COLOR MODE STANDARD RATE SETUP
CLOSE
EXECUTE
ARE YOU SURE? YES NO
Item Display Set range
Set
range
Default
value
A BLACK TEXT
(SLOPE) Black text edge area
engine
curve
calculating coefficient
(slope) setting
1 to 99 50
B BLACK TEXT
(INTERCEPT) Black text edge area
engine
curve
calculating coefficient
(intercept) setting
1 to 99 50
C COLOR TEXT
(SLOPE) Color text edge area
engine
curve
calculating coefficient
(slope) setting
1 to 99 50
D COLOR TEXT
(INTERCEPT) Color text edge area
engine
curve
calculating coefficient
(intercept) setting
1 to 99 50
E ED TEXT
(SLOPE) Error diffusion edge
area engine curve
calculating coefficient
(slope) setting 1 to 99 50
F ED TEXT
(INTERCEPT) Error diffusion edge
area engine curve
calculating coefficient
(intercept) setting 1 to 99 50
CLOSE
0
A:
A 㧦 50
B 㧦 50
C 㧦 50
D 㧦 50
㧧 BLACK TEXT (SLOPE)
㧧 BLACK TEXT (INTERCEPTE)
㧧 COLOR TEXT (SLOPE)
㧧 COLOR TEXT (INTERCEPTE)
SIMULATION NO.46-27
COEFFICIENT OF GAMMA SETUP
50
1 99
OK
TEST