Sharp MX 3501N - Color Laser - Copier, Руководство по обслуживанию

Страница: 176 / 448

MX3500N SIMULATION 7 – 68
44-31
Purpose Adjustment
Function (Purpose) Used to perform the phase adjustment for
OPC drum deflection. (Used to adjust the
phases of four OPC drums deflection.)
Section Process (OPC drum)
Item Adjustment
Operation/Procedure
1) Select the set item with [
↑
] and [
↓
] buttons.
The highlighted set value is switched and the value is dis-
played in the setting area.
* If there is any item over [
↑
], an active display is made and
item is shifted.
If there is no item over [
↑
], the display grays out and the
operation is invalid.
If there is any item under [
↓
], an active display is made and
item is shifted.
If there is no item over [
↓
], the display grays out and the
operation is invalid.
2) Enter "3" with 10-key in the print mode of set item A to change
the set value. (Default is 3.)
* Press [C] key to clear the entered values.
3) Set A3 paper in the cassette 1 tray.
4) Use [
↓
] button to shift to the paper of set item "C" and enter "3"
with 10-key. (The default is 3.)
5) When [OK] button is pressed, it is highlighted and the current
set value is saved to EEPROM and RAM.
* When [EXECUTE], [
↑
], [
↓
], [COLOR], or [BLACK] key is
pressed, the current set value is saved to EEPROM and
RAM.
6) Check the output pattern to examine deflections of C, M, Y,
and K.
• The deflection is within 2 lines.
→
Simulation is completed.
• The deflection is not within 2 lines.
→
Go to step 9.
7) Shift to the set item A and enter "1" with 10-key.
8) When [EXECUTE] button is pressed, the drum deflection
adjustment pattern is printed. (8 sheets are outputted.)
* Numbers 1 – 8 are printed sequentially in the output pattern.
9) Check 8 sheets of print patterns to find the print pattern in
which the deflection is within2 lines for C, M, and Y. Set the
print value of the print pattern to set item B.
10) To check the deflection in the set value, enter "3" to set item A
with 10-key, and press [EXECUTE] button to print one sheet of
the drum deflection adjustment pattern.
* When [C], [CA], [SYSTEM SETTINGS], or [EXECUTE] button is
pressed during self print, the operation is interrupted.
* After completion of self print, [EXECUTE] button returns to the
original state.
* For cassette selection, the manual feed cassette is set. (Set item
C is 1)
<Set item, set range, and default values>
* The display of item A/C is "Display item: Detail of display."
Example: PAPER : CS2
44-43
Purpose Adjustment/Setup/Operation data output/
Check (Display/Print)
Function (Purpose) Used to display each developing unit
installing state AD value.
This simulation is added to check the sam-
pling data of the detection judgment of
developing unit installation not only as the
judgment result (trouble display) but also as
the current state value.
Section Process (Developing)
Item Data (Machine condition)
Operation/Procedure
1) When the machine enters Simulation 44-43, the data stored in
EEPROM are displayed.
* Data are revised every 5sec.
Item
Display item: Detail
of display
Description
Set
range
Default
value
Writing
A PRINT
MODE 45deg Print mode 45 degree Deflection check pattern every 45 degree (8 sheets of print)
(1) 0
°
(2) 45
°
(3) 90
°
(4) 135
°
(5) 180
°
(6) 225
°
(7) 270
°
(8) 315
°
* The number in ( ) is printed on the output pattern.
1 to 3 1 3
(SET
VALUE)
NO
90deg 90 degree 2: Deflection check pattern for every 90 degree (4 sheets of print)
(1) 0
°
(3) 90
°
(5) 180
°
(7) 270
°
* The number in ( ) is printed on the output pattern.
2
SET VALUE SET VALUE 3: Deflection check print (One sheet of print) at the set value. 3
B COLOR Phase adjustment value
BK
→
CL
Angle step 0
°
(1)
→
45
°
(2)
→
90
°
(3)
→
135
°
(4)
→
180
°
(5)
→
225
°
(6)
→
270
°
(7)
→
315
°
(8)
1 to 8 2 YES
C PAPER MFT Cassette selection Manual feed 1 to 6 1 3
(CS2)
NO
CS1 Machine 1 stage 2
CS2 Machine 2 stage 3
CS3 Option paper feed desk 1 stage 4
CS4 Option paper feed desk 2 stage 5
LCC LCC 6
0
A:
A 㧦 3
B 㧦 2
㧧 PRINT MODE 㧦 SET VALUE
㧧 COLOR
SIMULATION NO.44-31
DRUM POSITION SETTING
3
㨇 1 㨪 3 㨉
OK
TEST
EXECUTE
CLOSE
C 㧦 2 㧧 PAPERSELECT