IMAGE SEND COMMUNICATION ERROR
SHARP
60
Report Code 2
Communication Interruption Content
Send / Receive
29
Not used
—
30
A communication error is generated between MFP controller and
Modem controller. (Report code is 0 or 16.)
—
31
DC current not detected (busy)
Send
32
Dial tone not detected (busy)
Send
33
Busy tone detection (busy)
Send
34
T0 time up (Remote machine not responding)
Send
35
T1 time up (Remote machine not responding)
Send
36
In dialling, polarity reversion detection (Remote machine not responding)
Send
37
Calling is not made (busy)<Collision detected (including CNG detection)>
Send
38
Not used
—
60
In resend of document filed data, an error occurs in decoding or coding.
Resend
61
In resend of document filed data, setting to inhibit resolution conversion is made.
(The resolution after resend is set to be Enlarged.)
Resend
62
In resend of document filed data, rotation setting is made for data which
cannot be rotated.
Resend
63
In resend of document filed data, data cannot be stored in HD
after conversion of resolution for resend.
Resend
64
In resending data of document file, during conversion for resending, the number
of IMS management pages exceeds the upper limit (999). (IT occurs in OSA Scan to
FTP also, resulting in memory over.)
Resend
OSA Scan
To FTP
70
E-mail header acquisition error
E-mail receive
71
Time out occurs during e-mail receive.
E-mail receive
72
Receive reject occurs during e-mail receive.
E-mail receive
73
Network communication cannot be made due to port disable.
Network send
74
An authentication of the POP server is failed when POP before SMTP is enabled.
Network send
75
In the setting of SSL communication, when SSL communication is tried but the
server side does not support SSL.
Network send
76
There is no image in network communication (transfer).
Network send
80
There is no attached file in received e-mail.
E-mail receive
81
The attached file of received e-mail is not of TIFF type which is supported.
E-mail receive
82
The TIFF type of the attached file in received e-mail cannot be recognized. ID error E-mail receive
83
The TIFF type of the attached file in received e-mail cannot be recognized.
E-mail receive
84
The TIFF type of the attached file in received e-mail cannot be recognized.
Version error
E-mail receive
85
The TIFF type of the attached file in received e-mail cannot be recognized.
Tag data error
E-mail receive
86
The TIFF type of the attached file in received e-mail cannot be recognized.
Tag parameter error
E-mail receive
87
The TIFF type of the attached file in received e-mail cannot be recognized.
Header size error
E-mail receive
88
The TIFF type of the attached file in received e-mail cannot be recognized.
Data error
E-mail receive
90
In e-mail receive; an attached file cannot be stored in memory. Memory over.
Cannot be stored in memory.
E-mail receive
91
In e-mail receive, an attached file cannot be stored in memory.
The file size is too great to be stored in memory.
E-mail receive
92
In SMTP e-mail receive; an attached file cannot be stored in memory.
Cannot be stored in memory.
E-mail receive
When sub code 2 is
08
or
30
and the communication report is
OK
, the report code is
00
or
16
.
Содержание MX-2640N
Страница 61: ...SHARP SENSOR LOCATION 61 MAIN ENGINE RSPF ...
Страница 62: ...SENSOR LOCATION SHARP 62 MX DE14 DESK MX DE20 DESK TANDEM DRAWER MX FN17 FINISHER ...
Страница 71: ...SHARP NOTES 71 Notes ...
