Sharp MD-R3, Руководство по эксплуатации

Страница: 43 / 48

(Continued)
When an error message is displayed, proceed as follows:
Error messages Meaning Remedy
BLANK MD
●
Nothing is recorded.
(Neither music nor a disc name have been
recorded on this MD.)
●
Replace the disc with a recorded disc.
Can’t COPY
●
You tried to record from a disc which you are
not allowed to copy.
●
Replace it with another disc which you can
copy from (regular CD).
Can’t EDIT
●
A track cannot be edited.
●
Change the stop position of the track and then
try editing it.
Can’t REC
●
Recording cannot be performed correctly due to
vibration.
●
Move the unit away from the source of vibration.
DEFECT
●
Since this disc has scratches on it, the
recording operation was skipped.
●
Replace the disc with another recordable disc.
CH ERROR
●
The CD changer is not working properly.
●
Press the POWER button to turn off the power,
and disconnect the AC power cord from the AC
outlet. Then connect the AC power cord, and
turn on the power again.
Din UNLOCK
●
Incorrect digital signals are input.
●
Connect correct digital signals.
●
Use the analog input jack.
DISC ERR
●
The disc is damaged or there is no TOC on the
disc.
●
Reload the disc or replace it.
DISC FULL
●
The disc is out of recording space.
●
Replace the disc with another recordable disc.
EDIT OVER
●
There is no space left to record the remainder
of the CD.
●
Replace the MD with another recordable disc.
FOCUS ERROR
●
The proper focus cannot be obtained.
●
Reload the MiniDisc.
MD ERROR
●
The unit is malfunctioning and will require
service.
●
Contact your nearest authorized Sharp servicer.
MECHA ERR*
●
There is a mechanical problem and the disc is
not working properly.
●
Press the POWER button to turn off the power,
and press the
7
button.
NAME FULL
●
The number of characters for the disc name or
track name exceeds 100.
●
Shorten the disc or track name.
*NO DISC*
●
A disc has not been loaded.
●
The disc data cannot be read.
●
Load a disc.
●
Reload the disc.
NOT AUDIO
●
The data recorded on this disc is not audio data.
●
Select another track.
●
Replace the disc.
PLAYBACK MD
●
You tried to record on a playback-only disc.
●
The data of disc names and track names are
not able to move from playback-only discs.
●
Replace it with a recordable MiniDisc.
●
Edit only the sound.
PROTECTED
●
The MiniDisc is write protected.
●
Move the write protection tab back to its original
position.
TEMP OVER
●
The temperature is too high.
●
Press the POWER button to turn off the power.
Allow the unit to cool for a while.
TOC ERR*
●
The disc has a large amount of damage.
●
TOC information cannot be read.
●
The MD does not meet the specifications for
MDs.
●
Replace the disc with another disc.
TOC FULL*
●
There is no space left for recording character
information (track names, disc names, etc.)
●
Replace it with another recordable disc.
TOC W ERROR
●
The unit is malfunctioning and will require
service.
●
Contact your nearest authorized Sharp servicer.
U TOC ERR*
●
The TOC information on this disc does not
meet the MD specifications or it cannot be read.
●
Replace it with another disc.
●
Erase all the data, and try recording.
U TOC W ERR
●
The TOC information could not be created
properly due to a mechanical shock or to
scratches on the disc.
●
Press the POWER button to turn off the power,
and try to write the TOC again.
(Remove any source of shock or vibration while
writing.)
? DISC
●
The data contains an error.
●
Replace the disc with another disc.
0 0:00
●
Music is not being recorded.
●
Replace the disc with a recordable disc.
*: Number or symbol
MD-R3
42