Sharp MD-R3 Скачать руководство пользователя

Страница: 12 / 48

COMPACT DISC OPERATION

■

Loading and playing CDs

Press the CD

■

button.

Press the

button to open the disc tray.

●

It is not possible to open more than one disc tray at any one
time.

Place the CDs on the disc tray, label side up.

●

Be sure to place 8 cm (3") CDs in the middle of the disc
trays.

Caution:
Do not place more than one CD in any tray position.
This can damage the player and the CDs.

Press the

button to close the disc tray.

●

The CD DIRECT PLAY button will light for the tray loaded
with a CD.

●

Repeat steps 2 - 4 to load discs into the second and third
disc trays.

●

The total number of tracks and the total disc playing time will
be displayed.

●

The music schedule will be displayed only for the number of
tracks on the disc.

●

If the CD contains more than 21 tracks, "

" will appear.

Press the CD

button.

●

Playback will begin from track 1 on the DISC-1.

●

DISC-1, DISC-2 and DISC-3 will be played continuously in
that order.

●

If you press the CD DIRECT PLAY 2 ( 2) button after
pressing the CD

button, DISC-2 and DISC-3 will be

played continuously.

●

If you press the CD DIRECT PLAY 3 ( 3) button after
pressing the CD

button, only DISC-3 is to be played.

●

If you press the CD

button after selecting a track by

turning the jog dial, playback will begin on DISC-1, from the
track you selected.

●

After the disc finishes playing, the next disc will be automat-
ically played.

●

When there is no CD in one of the disc trays, that tray will
be skipped, and the next CD will be played.

●

When all of the tracks on the CDs have been played, the unit
will stop automatically.

To interrupt playback:
Press the CD

button.

Press the CD

button to resume playback from the same

point.

To stop playback:
Press the CD

■

button.

To remove the CDs:
While in the stop mode, press the

button.

EJECT

CD DIRECT PLAY

DISC

TOTAL

9 10 11

The selected CD tray

Total number of
tracks

Total playing
time

Music schedule

More
tracks
indica-
tion













MD-R3

Содержание MD-R3

















































Результаты поиска

Содержание MD-R3

Отзывы:

Похожие инструкции для MD-R3

Бренды по названию

Популярные бренды

Sharp MD-R3, Руководство по эксплуатации

Результаты поиска

Содержание MD-R3

Отзывы:

Похожие инструкции для MD-R3

Бренды по названию

Популярные бренды