background image

(Continued)

Music scan play

(Remote control operation)

1

Select the desired program source, CD or MD, by pressing
the CD 

 or MD 

 button.

2

Press the MUSIC SCAN button while in the stop mode.

"M.SCAN PLAY" will appear.

Starting from the first track, approximately the first 12 seconds
at the beginning of each track will be played.

After the last track has been played, the unit will stop auto-
matically.

When one or more CDs are inserted and music scan play is
started, all of the tracks on all of the CDs will be played in
order, until the last track on the last CD is reached. Then the
unit will stop.
You cannot select just one of the discs for music scan play.

To stop music scan play:

Press the CD 

 or MD 

 button.

To perform music scan play repeatedly:

During music scan play, press the PLAY MODE button until "

R

"

appears.

Note:

You can also select repeat play before music scan play.

To program selected tracks during music scan play:
(Music scan program selection)

During music scan play, the current track being previewed can
be stored in memory.

1

Select the desired program source, CD or MD, by pressing
the CD 

 or MD 

 button.

2

Press the PROGRAM button.

“PRGM” will flash.

3

Press the MUSIC SCAN button.

“M.SCAN PRGM” will appear.

4

Press the PROGRAM button while playing the beginning of
a track to be stored in memory.

5

To halt the program, press the CD 

 or MD 

 button.

When you have selected an MD, the unit will enter the stop
mode.

When you have selected a CD, "M.SCAN REC?" will appear.
To halt the program, press the CD 

 button again.

When you press the ENTER button on the main unit while
"M.SCAN REC?" is displayed, you can record the pro-
grammed tracks.

To clear the programmed selections:

Press the CLEAR button on the remote control to turn off
"PRGM".
When you use the DELETE/CLEAR button on the main unit, all
of the programmed contents will be erased by holding it down
for at least 2 seconds.

The program contents will be erased.

CD

MD

PLAY

MODE

PROGRAM

MUSIC

SCAN

CLEAR

DISC

1

2

3

4

5

6

7

8

9 10 11 12 13

15 16 17 18 19 20

14

12

4

0dB

OVER

DISC

1

2

3

4

5

6

7

8

9 10 11 12 13

15 16 17 18 19 20

14

TOC

DISC

PRGM

2

3

4

5

TOC

DISC

PRGM

2

3

TOC

DISC

PRGM

TOTAL

2

3

5

TOC

12

4

0dB

OVER

DISC

PRGM

2

3

5

(When you have selected a CD)

When you press the ENTER button

MD-R3

16

Содержание MD-R3

















































Отзывы: