Sharp LC-60LE925X, Руководство по эксплуатации

Страница: 52 / 96

50
Enjoying 3D image viewing
Before using the 3D glasses
Before using the 3D glasses for the fi rst time, remove the insulating sheet attached to them.
Replacing the button cell battery
The battery has an expected service life of approximately 75 hours.
• When the battery power is low, the LED light blinks six times after the power is turned on.
• When replacing the button cell, use only the designated battery type (Maxell branded CR2032 lithium button battery).
Loosen the screw used to secure the battery
cover, and then remove the battery cover.
1
Remove the button cell battery.
1
Place the tip of the slotted precision screwdriver
into the opening between the button cell and
the socket.
2
Lift up the button cell while taking care not to
get the screwdriver caught on the metal latch.
2
When the battery comes loose from the
socket, pick it out with your fi ngers.
3
Hook a new button cell to the metal latch and
insert it into the socket.
• Take care not to reverse the battery polarity (
e
and
f
) when inserting the button cell.
4
Close the battery cover.
5
Insert the screw to secure the battery cover.
6
NOTE
• Refer to page 16 for details of battery disposal.
• Used batteries should be disposed in accordance with
local laws and regulations.
2
1
2
1
2
1
60LE925X_en_au.indd 50 60LE925X_en_au.indd 50 2010/09/01 16:33:13 2010/09/01 16:33:13