Sharp LC-60LE925X, Руководство по эксплуатации

Страница: 64 / 96

62
To watch an HDMI equipment image, select
“INPUT4”, “INPUT5”, “INPUT6” or “INPUT7”
using
INPUT on the remote control unit or on
the TV.
1
Press MENU and the MENU screen displays.
2
Press
b/c/d
to select “Option”.
4
Press
a
/
b
to select “HDMI auto view”, and
then press ENTER.
• The HDMI auto view can be selected only when
“INPUT4”, “INPUT5”, “INPUT6” or INPUT7 is
selected.
6
Setup CH list
Menu
:Back :Enter
Input label
Input skip
Τ erminal setting
Option
[ ]
HDMI auto view
Allow HDMI view mode to change
[Enable]
w
HDMI (High-Defi nition Multimedia Interface)
Auto View
Press
a
/
b
to select the desired item, and
then press ENTER .
7
NOTE
• Refer to your external equipment operation manual for the
above settings.
• When connecting a DVI-HDMI conversion adaptor/cable to
the HDMI terminal, the image may not come in clearly.
Co
nnecting an HDMI output device
Settings when using external devices
HDMI terminals can carry audio and visual signals to the TV with an HDMI certifi ed cable. When you want to output
the audio and picture from an HDMI output device on the TV, select “INPUT4”, “INPUT5”, “INPUT6” or “INPUT7”
by switching the input source.
HDMI output device
Selected item Description
Enable/Disable Set whether or not to use WIDE
MODE based on signal recognition,
including an HDMI signal.
Settings when using HDMI output devices
HDMI cable
(commercially
available)
Press
c/d
to select “Setup”.
3
Press
a
/
b
to select “Terminal setting”, and
then press ENTER .
5
Audio select for connecting HDMI
When connecting HDMI to the INPUT5 terminal, and
inputting analogue audio signals from the AUDIO IN
terminal.
Go to “MENU”
s
“Setup”
s
“Option”
s
“Terminal
setting”
s
“Audio select”.
Selected item Description
HDMI (Digital) When connecting devices with HDMI
cable to the INPUT5 terminal.
HDMI +
Analogue When connecting devices with HDMI
cable to the INPUT5 terminal and
inputting analogue audio signals from
the AUDIO IN terminal.
NOTE
• You must set this to “HDMI+Analogue” when connecting
devices with an HDMI-certifi ed cable to the INPUT5
terminal. If “HDMI (Digital)” is set, there will be no sound
output.
60LE925X_en_au.indd 62 60LE925X_en_au.indd 62 2010/09/01 16:33:56 2010/09/01 16:33:56