Sharp LC-60LE925X, Руководство по эксплуатации

Страница: 76 / 96

74
Other useful features
Connecting a USB device
Connect a USB device to the TV as shown below.
• The TV automatically switches to the USB mode when a
USB device is inserted in the USB terminal (this does not
work when using the time shift function).
• Depending on the USB device, the TV may not be able to
recognise the contained data.
• Use only alphanumeric characters for naming fi les.
• File names over 80 characters (may vary depending on
character set) may not be displayed.
• Do not disconnect a USB device or memory card from the
TV while transferring fi les, when a screen is switching to
another or before you exit “USB” from “INPUT” in the “CH
list” menu.
• Do not connect and disconnect a USB device from the TV
repeatedly.
CAUTION
• Do not use a USB extension cable when connecting a USB
device to the USB terminal of the TV.
• Using a USB extension cable may prevent the TV from
performing correctly.
Connecting a Home network server
Connect a Home network server to the TV as shown
below. This function is available via Windows 7.
1
Home network server
2
LAN cable
3
Router
NOTE
• Depending on the Home network server, the TV may not
be able to recognise the contained data.
• Use only alphanumeric characters for naming fi les.
• File names over 80 characters (may vary depending on the
character set) may not be displayed.
• Do not disconnect a Home network server from the TV
while transferring fi les, when a screen is switching to
another or before you exit “Home network” from “INPUT” in
the “CH list” menu.
• Do not connect and disconnect a Home network server
from the TV repeatedly.
Ethernet setup
You may need to setup the TV for a Home network
server.
1
Press MENU and the MENU screen displays.
2
Press
c
/
d
to select “Setup”.
3
Press
b
/
c
/
d
to select “View setting”.
4
Press
a
/
b
to select “Ethernet setup”, and
then press ENTER .
• Check that numbers are displayed for each
setting.
• Specify the numbers by following the on-screen
instructions.
5
Press MENU to exit.
Setting Ethernet info.
[Current setup]
: Auto
: Auto
: Auto
: Auto
: xx xx xx xx xx xx IP address
Netmask
Gateway
DNS
MAC address
Change Initialize
60LE925X_en_au.indd 74 60LE925X_en_au.indd 74 2010/09/01 16:34:34 2010/09/01 16:34:34