29
Connecting a PC
Viewing an Image from a PC
Use the PC terminals to connect a PC.
A
• The PC input terminals are DDC1/2B-compatible.
• Refer to page
31
for a list of PC signals compatible with the System.
• Make sure to select the same signal values for the output signal of a PC and the input signal of the LCD TV set before connecting with
the PC. (See pages
30
and
31
.)
• Depending on the PC being used, images may not be shown without converting the output signals into external output. Please refer to
your PC’s manuals regarding converting to external output.
Signal names for 15-pin mini D-sub connecter
15
14
13
12
9
11
10
8
7
6
5
4
3
2
1
Pin No.
Signal name
Pin No.
Signal name
Pin No.
Signal name
1
R
6
GND (Ground)
q
Not connected
2
G
7
GND (Ground)
w
SDA
3
B
8
GND (Ground)
e
HD
4
Not connected
9
Ⳮ
5V
r
VD
5
CSYNC
0
GND (Ground)
t
SCL
A
• Pin No. 5 on the LCD TV set is not used for inputting the signal.
• Pin No. 9 is not connected with the supplied RGB cable.
Ferrite core
Connecting the RGB cable
• Connect the RGB cable making sure
that it fi ts correctly into the terminal.
Then, fi rmly secure the connectors
by tightening the screws on both
sides of the plug.
• Do not remove ferrite cores attached
to the RGB cable.
PC
RGB cable
To AUDIO
input terminal
To Audio output
terminal
To ANALOG
RGB terminal
To ANALOG RGB
output terminal
ø 3.5 mm stereo minijack cable
(commercially available)
Displaying an Image from a PC
To view an image from a PC, perform the following procedure.
1
Press
PC
to display the PC mode screen.
2
Select the PC input signal. (See page
30
.)
3
Adjust the “FINE SYNC.” items if the PC image does not come in clearly. (See page
30
.)
A
• You can also display the PC mode by pressing
TV/VIDEO
on the remote control or
INPUT
on the main
unit. (See page
10
.)
LC-20AX7X̲E̲P20̲31.indd 29
LC-20AX7X̲E̲P20̲31.indd 29
2006/10/24 11:54:38
2006/10/24 11:54:38
