Sharp LC-15B2MA, Руководство по эксплуатации

Страница: 16 / 33

15
1
Press MENU (PRESET-
1
) on the
upper part of the LCD TV set for
more than two seconds. The
AUTO mode screen appears.
2
Press MENU (PRESET-
1
) to
display the MANUAL mode screen.
Press
MENU (PRESET-
1
) again
to change the MANUAL mode as
shown below.
3
Select the channel position using
CHANNEL SELECT or
CH ( )/( ) .
4
Press VOL (+)/(–) to locate the
channel you want to preset to the
position. Search is initiated and
when a TV signal is received
during the search, the search
stops.
5
Repeat steps 3 and 4 above, to
preset the channel positions for
other broadcasts, etc.
6
Press MENU (PRESET-
1
) to
return to the normal screen.
Note:
•
SYSTEM may not have been set correctly,
if noise can be heard or if there is no
sound.
In such case, reset to SOUND SYSTEM
using
MENU .
■
In a weak reception area, or under
bad reception conditions.
1
Press MENU (PRESET-
1
) on the
upper part of the LCD TV set for
more than two seconds. The
AUTO mode screen appears.
2
Press MENU (PRESET-
1
) to
display the MANUAL mode screen.
3
While the MANUAL mode screen
is displayed, press
MENU for more
than 2 seconds.
The channel position number
remains in green.
Note:
•
While the MANUAL mode screen is
displayed, press
MENU .
(The LANGUAGE mode screen will
appear.)
4
Adjust for good reception using
VOL (+)/(–) .
5
After finishing the adjustment,
press
MENU (PRESET-
1
) to
continue channel presetting.
PRESET (Continued)
AUTO
→
MANUAL
→
LANGUAGE
→
NORMAL
SCREEN
■
Setting a channel to a desired TV
station:
Presetting the Channels (MANUAL)
Upper control panel
CH
VOL
TV/VIDEO
DISPLAY
BRIGHT SLEEP
MENU
POWER
MPX -/--
MENU
VOL(+)/(–)
CH ( )/( )
CHANNEL
SELECT
1,2,6 3
VOL CH MENU TV/VIDEO
1 2 PRESET
4
1,2,3,5
VOL CH MENU TV/VIDEO
1 2 PRESET
4
Sound System
Channel position
number
Auto mode screen
Manual mode screen
➡➡
L A N G U A G E
E N G L I S H
MENU
S E L E C T : E X I T :
Upper control panel