Sharp LC-15B2MA, Руководство по эксплуатации

Страница: 6 / 33

5
PREPARATION
Batteries for Remote Control
If the remote control fails to operate LCD colour TV functions, replace the batteries in the remote
control.
–
Caution!
Cautions regarding batteries
Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the
instructions below.
• Place batteries with their terminals corresponding to the (+) and (–) indications.
• Different types of batteries have different characteristics. Do not mix batteries of different types.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new
batteries and/or cause old batteries to leak chemicals.
• Remove batteries as soon as they are non-operable.
Chemicals that leak from batteries can cause a rash. If chemical leakage is found, wipe with a
cloth.
• The batteries supplied with the product may have a shorter life expectancy due to storage conditions.
• If the remote control is not used for an extended period of time, remove batteries from the remote
control.
Preparing and Using the Remote Control
■
Use the remote control by pointing it towards the remote sensor window.
Objects between the remote control and sensor window may prevent proper
operation.
Cautions regarding use of remote control
■
Do not expose the remote control to shock.
In addition, do not expose the remote control to liquids, and do not place in
an area with high humidity.
■
Do not install or place the remote control under direct sunlight.
The heat may cause deformation of the unit.
■
The remote control may not work properly if the remote sensor window of the
main unit is under direct sunlight or strong lighting. In such case, change the
angle of the lighting or LCD TV set, or operate the remote control closer to
the remote sensor window.
1
Open the battery
cover.
2
Insert batteries [two
“AAA” size (UM/SUM-4)
batteries, supplied with
product].
3
Close the battery
cover.
■
Slide the cover while
pressing the (
[
) part.
■
Place batteries with their
terminals corresponding to
the (+) and (–) indications
in the battery compartment.