Sharp FO-DC635U, Руководство по обслуживанию

Страница: 55 / 166

FO-DC635U
2 – 36
SW64 No. 2 Reserved
Set to "0".
SW64 No. 3 Continuous serial polling
Turns ON/OFF the continuous polling function.
SW64 No. 4, No. 5 Time interval for continuous serial polling
Used to set the interval time for continuous serial polling. Normally set
to no interval (0 minute).
SW64 No. 6, No. 7 Reserved
Set to "0".
SW64 No. 8 Quick on line function
It is selected whether auto dial call is activated in the memory input
mode when one document is completely read or when all pages are
completely read.
SW65 No. 1, No. 2 Cassette selection
To set selective modes for detail paper cassettes of the printer.
SW65 No. 3 ~ No. 5 The tray priority cassette
To select the tray priority cassette.
SW65 No. 6 ~ No. 8 The 1st priority cassette
To select the first priority cassette.
SW66 No. 1 ~ No. 3 The 2nd priority cassette
To select the second priority cassette.
SW66 No. 4, No. 5 Cassette selection of separate page
The supply origin of a separate page is set.
SW66 No. 6 Reserved
Set to "0".
SW66 No. 7 Maximum size of input document
The maximum scan length can be switched.
SW66 No. 8 Print hold function
Use or disable Print Hold function.
SW67 No.1, No. 2 Power save mode
The heater mode of a printer is set.
SW67 No. 3 ~ No. 5 Density adjustment of print bias
The density of printing is set.
It can be also set in the print diagnosis mode.
SW67 No. 6, No. 7 Drum life detection
The detection mode of Drum life is set.
SW67 No. 8 Reserved
Set to "0".
SW68 No. 1, No. 2 Distinctive ring pattern
The distinctive ring patter is set for country.
SW68 No. 3, No. 4 Reserved
Set to "1".
SW68 No. 5, No. 6 Reserved
Set to "0".
SW68 No. 7 Reserved
Set to "1".
SW68 No. 8 Reserved
Set to "0".
SW69 No. 1 Reserved
Set to "1".
SW69 No. 2, No. 3 Reserved
Set to "0".
SW69 No. 4 Reserved
Set to "1".
SW69 No. 5 Reserved
Set to "0".
SW69 No. 6, No. 7 Reserved
Set to "1".
SW69 No. 8 Reserved
Set to "0".
SW70 No. 1 Reserved
Set to "1".
00: Manual To select detail paper in the tray priority
cassette in accordance with setting by
SW65 3-8 and SW65 1-3. If the detail
paper in the tray priority cassette runs
short, the first priority cassette will be
used.
01: Automatic 1 To automatically select detail paper with
optimum size among the tray to second
priority cassettes in accordance with set-
ting by SW65 3-8 and SW65 1-3. The
optimum paper is selected by every page.
If all the cassettes have the same size
paper, paper will be selected according to
the cassette priority.
10: Automatic 2 To automatically select detail paper with
optimum size among the tray to second
priority cassettes in accordance with set-
ting by SW65 3-8 and SW65 1-3. At the
start of printing, the optimum paper is
adopted only for the first page. There
after the same cassette selected for the
first page will be used from the second
page and after. If all the cassettes have
the same size paper, paper will be
selected according to the cassette prior-
ity.
11: Except the above 01: the same setting as in the case of
Automatic 1
001: Tray paper feeder (MP-TRAY)
010: 1st paper feeder
Except the above Printing started from the possible paper feeder
000: Not used (To set in case of using only paper
feeder that has been set in the tray priority cas-
sette)
001: Tray paper feeder (MP-TRAY)
010: 1st paper feeder
Except the above Not used
000: Not used (To set in case of using only paper
feeder that has been set in the tray priority cas-
sette)
001: Tray paper feeder (MP-TRAY)
010: 1st paper feeder
011: 2nd paper feeder
Except the above Not used