Sharp FO-DC635U, Руководство по обслуживанию

Страница: 19 / 166

FO-DC635U
1 – 16
12. Quick reference guide
12.1. SENDING FAXES
Place your document (up to 50 letter-size pages) face down in the doc-
ument feeder.
(Note: For Normal Dialing and Direct Keypad Dialing, you can also
load the document after dialing the number.)
Press or if needed.
12.1.1 Normal Dialing
1) Lift extension phone or press .
2) Dial the fax number (if using an extension phone, dial on the exten-
sion phone keypad).
3) Wait for the reception tone (if a person answers, ask them to press
their Start key).
4) Press .
12.1.2 Rapid Key Dialing
1) Press the desired Rapid Key.
12.1.3 Speed Dialing
1) Press and enter the desired Speed Dial number (press
if you entered a 3-digits number).
2) Press .
12.1.4 Direct Keypad Dialing
1) Dial the fax number.
2) Press .
12.2. STORING AUTO DIAL NUMBERS
1) Press and then or until ENTRY MODE is
selected in the display.
2) Press . Make sure that DESTINATION SETTING is
selected.
3) Press . Make sure that SET is selected. (To clear a num-
ber, select CLEAR.)
4) Press .
5) To store a Rapid Key number, press the desired Rapid Key.
To store a Speed Dial number, press and enter a number
from 1 to 200 (press if you entered a 3-digits).
(If clearing a number, select it as explained above and then press
and .)
6) If the network scanner option is installed, SELECT DESTINATION
TYPE will appear. Make sure that FAX is selected and press
.
7) Enter the full fax number and press .
8) Enter a name by pressing the letter keys and press .
9) Select YES if this is a Chain Dial number or NO if not, and press
.
10)If the dual-line option is installed, select LINE-1, LINE-2, or AUTO
and press .
11)Press repeatedly to exit.
RESOLUTION CONTRAST
SPEAKER
START/
ENTER
SPEED DIAL
START/
ENTER
START/
ENTER
START/
ENTER
MENU
START/
ENTER
START/
ENTER
START/
ENTER
SPEED DIAL
START/
ENTER
START/
ENTER
STOP
START/
ENTER
START/
ENTER
START/
ENTER
START/
ENTER
START/
ENTER
STOP