FO-DC635U
1 – 8
3. Installing the print cartridges (Toner cartridge:
FO-50ND)(Drum cartridge: FO-47DR)
Follow the steps below to install or replace the toner and drum car-
tridges.
• The initial starter toner cartridge included with the fax machine can
print approximately 3000 letter-size pages (4% coverage of each
page; continuous printing).
• The replacement toner cartridge (FO-50ND) can print approxi-
mately 6000 letter-size pages.
• The drum cartridge (FO-47DR) can print approximately 20,000 let-
ter-size pages.
1) Press the cover release to open the print compartment cover.
•
Caution!
The fusing unit inside the print compartment becomes
very hot during operation. Be careful not to touch the inside of the
compartment.
2) If you are replacing the toner cartridge, remove the old cartridge
and dispose of it according to local regulations.
Go directly to STEP 5 if you are only replacing the toner cartridge
and not the drum cartridge.
To make the cartridge more compact for disposal, press the buttons
on the ends of the handle and fold the handle down.
• If you are replacing the drum cartridge but not the toner car-
tridge, remove the toner cartridge and place it on a sheet of
paper.
3) If you are replacing the drum cartridge, remove the old cartridge
and dispose of it according to local regulations.
4) Remove the new drum cartridge from its packaging. Insert the drum
cartridge into the print compartment.
•
Caution!
Excessive exposure to light will damage the drum car-
tridge. Install the cartridge promptly after removing it from its
packaging.
• Make sure the drum cartridge is inserted in as far as it will go.
5) If you are installing a new toner cartridge, remove the new toner
cartridge from its packaging. Remove the tape from the cartridge
and then open the cartridge handle so that it stands straight up.
6) Shake as indicated by the arrows to distribute the toner evenly
within the cartridge.
• If the toner is still lumpy after shaking, the gears in the cartridge
may make a noticeable sound when the print compartment
cover is closed after installing the cartridge. This is normal and
does not indicate a problem.
GREEN
BLUE
Содержание FO-DC635U
