Sharp FO-5600, Руководство по эксплуатации

Страница: 90 / 115

<P=005>
Setting 22: QUICK ON LINE
When you transmit a multi-page document, this setting determines whether your fax will dial the
receiving party and begin transmitting while scanning is still in progress, or wait until all pages
have been scanned before dialling. Press "1" to have the fax dial and begin transmission while
scanning is still in progress, or "2" to have it wait until all pages have been scanned.
•
Initial setting: 1
Setting 23: MULTI TTI
If you are using Department Control, you can press "1" to have the department name (the name
associated with the department code entered by the operator to access the fax) appear at the
top of each transmitted document. This will appear in place of the name entered in "Entering
Your Name and Fax Number" in Chapter 2. Press "2" to turn Multi TTI off (the sender’s name
entered in Chapter 2 will appear).
•
Initial setting: 2
Setting 24: BEEP LENGTH
This sets the duration of the beep which signals the end of transmission, reception, or copying.
Press "1" for 3 seconds, "2" for 1 second, or "3" for no beep.
•
Initial setting: 1
Setting 25: DEPARTMENT CODE DIGITS
This setting allows you to change the number of digits used for Department Codes. Enter any
number from "3" to "9".
•
Initial setting: 4
Setting 26: DISTINCTIVE RING
If you subscribe to a distinctive ring service from your telephone company, press 1 to have your
fax signal voice calls and fax transmissions by different ring patterns. Press 2 to turn the
function off. (This setting is described in more detail in
Distinctive Ring in Chapter 2.)
•
Initial setting: 2
Setting 27: VERIFICATION STAMP
Press "1" if you want the fax machine to stamp each original document page as it is scanned.
After scanning, you can check to see if all pages have been stamped to verify that no double
feeds occurred. Press "2" to turn the function off.
•
Initial setting: 2
Setting 28: PRINT HOLD
Press "1" if you want the fax to hold received documents in memory instead of immediately
printing them out. Press "2" to disable the Print Hold function.
•
Initial setting: 2
Setting 29: PC INTERFACE MODE
Press "1" if you want to operate the fax from a personal computer, or "2" to disable computer
operation.
•
Initial setting: 2
Setting 30: RECEIVE UNIT
Press "1" to have incoming documents received in your personal computer. Press "2" to have
incoming documents received and printed out by your fax.
•
Initial setting: 2
OPTIONAL SETTINGS
OPTION SETTINGS 5-5