P
R
EC
AUTIONS
– 2 –
EN
PRECAUTIONS
S
AFETY
I
NFORMATION
NOTE:
This VCR/DVD can be used only where the power supply is AC
220 V-240 V, 50 Hz. It cannot be used elsewhere.
CAUTION:
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS
RADIATION EXPOSURE.
AS THE LASER BEAM USED IN THIS VCR/DVD IS
HARMFUL TO THE EYES, DO NOT ATTEMPT TO
DISASSEMBLE THE CABINET. REFER SERVICING TO
QUALIFIED PERSONNEL ONLY.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, AND ANNOYING INTERFERENCE, USE THE
RECOMMENDED ACCESSORIES ONLY.
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS APPARATUS TO DRIPPING OR
SPLASHING, NO OBJECTS FILLED WITH LIQUIDS, SUCH
AS VASES, SHOULD BE PLACED ON THE APPARATUS.
Laser Diode Properties
Material:
GaAs
Wave length:
DVD: 655 nm
CD:
790
nm
Emission Duration: Continuous
Laser output:
Max. 0.8 mW
Power Cord Protection
To avoid any malfunctions of the VCR/DVD, and to protect against
electric shock, fire or personal injury, please observe the following.
• Hold the plug firmly when connecting or disconnecting the AC
power cord.
• Keep the AC power cord away from heating appliances.
• Never put any heavy object on the AC power cord.
• Do not bundle any cables such as; AC power cord, Round Coaxial
cable or other cables that are used to connect this VCR/DVD to your
TV together. The noise or disturbance of the picture may be generated.
• Do not attempt to repair or reconstruct the AC power cord in any way.
• This VCR/DVD is classified as a CLASS 1 LASER product.
• The CLASS 1 LASER PRODUCT marking is embossed on the rear cover.
• This product contains a low power laser
device. To ensure continued safety, do
not remove any cover or attempt to gain
access to the inside of the product. Refer
all servicing to qualified personnel.
Location and Handling
• Do not stand the VCR/DVD vertically. Install the VCR/DVD in a hori-
zontal and stable position. Do not place anything directly on top of
the VCR/DVD. Do not place the VCR/DVD directly on top of the TV.
• Depending on the TV, noise or disturbance of the picture and/or
sound may be generated if the VCR/DVD is placed too close to your
TV. In this case, please ensure enough space between your TV and
the VCR/DVD.
• Do not cover or place the VCR/DVD in enclosed spaces to prevent
excessive temperature build up.
• Do not place the VCR/DVD in direct sunlight, or near heat sources.
• Depending on the environment, the temperature of the VCR/DVD
may increase slightly.
This is not a malfunction.
• Keep the VCR/DVD away from strong magnetic objects.
• Do not place any object containing water or other liquids on the
VCR/DVD. In the event that liquid should enter the cabinet, unplug
the VCR/DVD immediately and contact the retailer or service centre
approved by SHARP immediately.
• Do not remove the VCR/DVD cabinet. Touching parts inside the cab-
inet could result in electric shock and/or damage to the VCR/DVD.
For service and adjustment inside the cabinet, call a qualified dealer
or service centre approved by SHARP.
• Be sure to remove a disc and video tape and unplug the AC power
cord from the output before carrying the VCR/DVD.
Nonuse Periods
• When the VCR/DVD is not being used, switch the VCR/DVD to the
standby mode.
• When left unused for a long period of time, the VCR/DVD should be
unplugged from the household AC outlet.
No Fingers or Other Objects Inside
Do not put your fingers or objects on the disc tray or in the cassette
compartment.
Warning of Dew Formation
Moisture may form inside the VCR/DVD under the following conditions:
• Immediately after a heater is turned on.
• In a steamy or humid room.
• When the VCR/DVD is suddenly moved from a cold to warm envi-
ronment. If moisture forms inside this VCR/DVD, it may not operate
properly or damage the video tape. In such case, turn on the power
and wait for more than 2 hours for the moisture to evaporate.
A E R I A L
R F O U T
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
KLASS 1 LASER APPARAT
CLASSE 1 PRODUIT LASER
http://www.usersmanualguide.com/
