105
GB
OTHER
INFORMA
TION
Problem
No image from
the Player
appears on the
screen of a
connected
device.
The volume of
Dolby Digital
audio from a
DVD is too low.
The battery
pack does not
charge.
Power does
not turn on.
POWER (G)/
CHARGE (R)
lamp does not
light (battery
pack does not
charge).
DVD mode
Recommended Action
• Make sure the channel of the connected TV is
set to VIDEO or AV.
• Make sure video and audio cables are
connected correctly.
• Change the “COMPRESSION” setting to “ON”.
This setting compensates for the relatively low
average volume level of Dolby Digital, which is
used to provide the widest possible dynamic
range.
• Make sure the Player is turned off. The battery
pack does not charge when it is connected to the
Player while Player power is turned on.
• A warm battery takes longer than normal to
charge. Wait until the battery cools to normal
temperature before trying to charge it.
• Replace the battery pack with a charged one or
switch to AC adapter power.
• Charging of a battery pack may become disabled
(and the POWER (G)/CHARGE (R) lamp may
fail to light) whenever heat from the Player
causes the internal temperature of an attached
battery pack to rise above certain level. When
this happens, remove the battery pack from the
Player. Charging will start automatically when
battery pack internal temperature drops to a safe
level.
• Make sure the temperature of the battery pack
is within the allowable temperature range of
10
°
C to 30
°
C for charging.
• Check to make sure that the AC adapter DC
cord is connected correctly.
Page
23
47
29, 30
101,
102
28-31
–
102
28
Battery Pack Operation
Troubleshooting