81
GB
SPECIAL
FUNCTIONS
DVD
DVD
DVD-RW
DVD-RW
C D
C D
VIDEO
VIDEO
C D
C D
Audio setting
A number of different methods are used to record audio onto a DVD video disc,
including multi-channels (used for voiceovers in other languages), Dolby Digital
(5.1ch), DTS, and linear PCM. Your Player provides a number of different audio
modes from which you can choose to suit the type of disc you are playing.
Use the following procedure to perform the Audio setting.
1
Press
FUNCTION
during playback.
• The Function control screen appears.
2
Use
'
or
"
to select
and then press
ENTER
.
3
Press
'
or
"
to select the audio format
you want to use.
• See page 111 for details about the
types of audio format.
• When playing a DVD-RW, VIDEO CD or
Audio CD, the audio playback changes
in the following sequence:
L+R
L
R
4
Press
ENTER
to confirm the setting.
• You can exit the Function control screen by pressing
FUNCTION
or
RETURN
.
• When you set the “PRO LOGIC” setting in “AUDIO SETUP” to “ON” (see page
51), selecting an audio format that uses “PRO LOGIC” causes “
D+PL” to
appear.
• This function can only be used for discs on which the sound has been recorded
in multiple formats.
• To play back VIDEO CDs recorded with DTS format, audio mode should be set to
“L+R”. The Digital signal cannot be output correctly if audio mode is set to “L” or “R”.
• With certain types of discs, you can change the audio using the disc menu. (See
page 96.)
• A DTS digital surround decoder is required to listen to DTS audio.
1 5.1ch
.
DVD
Using the Function Control
2LPCM
DVD
