![Sharp DM-1500 Скачать руководство пользователя страница 85](http://html.mh-extra.com/html/sharp/dm-1500/dm-1500_service-manual_367476085.webp)
Main code
Sub code
Content
50
10
Paper center OC/Document center SPF document center offset
(Outline)
The center offset position of copy image on the copy paper and that of document scan are adjusted by
adjusting the scan left margin of ASIC and the print left margin register set value.
(Operation/Procedure)
1.
When this simulation is executed, the currently set value is displayed.
2.
For a machine with a multi manual paper feed unit installed, when the copy mode select key is pressed, each
set mode and display are changed.
For a machine with a single manual paper feed unit installed, when the copy mode select key is pressed,
each set mode and display are changed.
✩
Machine with a multi manual paper feed unit
✩
Machine with a single manual paper feed unit
18
Memory reverse position adjustment in duplex copy
When this simulation is executed, the currently set correction value is displayed. Enter the desired correction
value with the 10-key and press the print key. The entered value is stored. (The correction value ranges from 1
to 99. 0 or 50 for zero correction.)
Front print in the S-D mode and even page print in the D-S mode are performed with reverse memory operation
from the rear of the original. When, therefore, the print position adjustment of the output image is required,
perform the adjustment as follows:
The image direction in reverse memory copy is shown in Fig. 1. When the original scanning is made in the
arrow direction, output images are printed from the rear edge of scanning.
If, therefore, the print lead edge is shifted, set the reference chart so that the reference position is in the rear
and use this simulation to change the simulation set value so that the lead edge of print images comes in the
proper position.
Printing is started at the print start position and executed from the final memory image data to the head data.
By changing the position of the end data stored in memory with the simulation set value, the image lead edge
position is adjusted and the read edge position of scanning is changed.
Therefore, the end position of scanning is changed by the simulation set value to change the position of the end
data stored in memory. The image lead edge is adjusted in this manner.
Adjustment mode
Display lamp
Print center offset (Main cassette paper feed)
AE, main cassette lamp
Print center offset (2nd cassette paper feed)
AE, 2nd cassette lamp
Print center offset (Manual paper feed)
AE, Manual paper feed lamp
OC/Document center offset
AE, TEXT lamp
SPF/Document center offset
AE, TEXT, PHOTO lamp
Adjustment mode
Display lamp
Print center offset (Main cassette paper feed)
AE, Main cassette lamp
Print center offset (Manual paper feed)
AE lamp (Blinking)
OC/Document center offset
AE, TEXT lamp
SPF/Document center offset
AE, TEXT, PHOTO lamp
Original transport direction
Lead edge of scanning
Paper transport direction
Print lead edge
Lead edge void (1)
Print start position
Rear edge void
Print rear edge
End position of scanning
(Default: Scan cut by void(1))
Rear edge of scanning
Scanning direction
DM-1505
9 – 11
Содержание DM-1500
Страница 125: ...OPU DM 1505 12 9 ...