Sharp DK-KP95P, Руководство по эксплуатации

Страница: 8 / 16

E-7
Caution:
●
Do not place two discs in the disc compartment.
●
Do not play discs of special shapes (heart, octagon, etc). It
may cause malfunctions.
●
Do not push the disc compartment while it is moving.
●
If the power fails while the compartment is open, wait until the
power is restored.
●
If TV or radio interference occurs during CD operation, move
the unit away from the TV or radio.
●
Be sure to place 8 cm (3") disc in the middle of the disc
compartment.
●
Due to the structure of the disc information, it takes longer to
read an MP3/WMA disc than a normal CD (approximately 20
to 90 seconds).
Notes for CD or MP 3 /WMA disc:
●
When the end of the last track is reached during fast forward,
“END” will appear on the display and CD operation will be
paused. When the beginning of the first track is reached
during fast reverse, the unit will enter the playback mode (only
for CD).
●
Rewritable multi-session discs with unfinished writing, can
still be played.
By using the Numeric buttons, the desired tracks on the
current disc can be played.
Use the Numeric buttons on the remote control to select
the desired track while playing the selected disc.
●
The Numeric buttons allow you to select up to number 9.
●
When selecting number 10 or higher, use the “10+” button.
Notes:
●
A track number higher than the number of tracks on the
disc cannot be selected.
●
During random play, direct search is not possible.
To stop playback:
●
Press the (CD ) button.
Repeat play can play one track, all tracks or a programmed
sequence continuously.
To repeat one track:
Press the PLAY MODE button repeatedly until “Repeat One”
appears. Press the / (CD / ) button.
To repeat all tracks:
Press the PLAY MODE button repeatedly until “Repeat All”
appears. Press the / (CD / ) button.
To repeat desired tracks:
Perform steps 1 - 4 in “Programmed play” section on page 8
and then press the PLAY MODE button repeatedly until
“Repeat All” appears.
Caution:
After performing repeat play, be sure to press the (CD )
button. Otherwise, the disc will play continuously.
Listening to a CD or MP 3 /WMA disc
■
Disc playback
1
Press the POWER ON/STAND-BY button to turn the power on.
2
Press the CD/USB button on the remote control or FUNCTION
button repeatedly on the main unit to select CD function.
3
Press the OPEN/CLOSE button
to open the disc compartment.
4
Place the disc in the disc
compartment, label side front.
5
Press the OPEN/CLOSE button
to close the disc compartment.
6
Press the / (CD / ) button to start playback. After the
last track is played, the unit will stop automatically.
■
Direct track search
A. For example, to choose 1 3
1
Press the “10+” button once.
2
Press the “1” button.
3
Press the “3” button.
B. For example, to choose 1 3 0
1
Press the “10+” button twice.
2
Press the “1” button.
3
Press the “3” button.
4
Press the “0” button.
■
Various disc functions
Function Main
unit
Remote
control
Operation
Play Press in the stop mode.
Pause Press in the playback
mode. Press the /
button to resume
playback from the
paused point.
Stop
Press in the playback
mode.
Track
up/
down
Press in the playback or
stop mode.
If you press the button in
the stop mode, press the
/ button to start the
desired track.
Fast
forward/
reverse Press and hold down in
the playback mode.
Release the button to
resume playback.
■
Repeat play
To cancel repeat play:
Press the PLAY MODE
button repeatedly until
“Normal” appears and
“
” disappears.
Selected track number