E-
3
1
Press the POWER ON/STAND-BY button.
2
Press the NETWORK button.
3
Press the iPod MENU button on the remote control.
4
Press the
/
button to select
‘Wi-Fi Setup’
.
Press the ENTER button.
5
Press the
/
button to select
‘Direct’
. Press the
ENTER button. Wait until ‘ • ’ on the display turns off and
shows
‘Direct Ready’
which takes about 40 seconds.
6
On the iPod touch/iPhone/iPad, select
‘Settings’
-->
‘Wi-Fi’
. On the PC/Mac, enter the list of available
wireless networks
For other DLNA compatible devices, turn on the Wi-Fi.
For more details, refer to your devices’ manual.
7
Select
SHARP_DK-KP95
from the list of available
networks.
8
Launch
Music
and play desired song on your iPod touch /
iPhone or iPad. For PC/Mac, launch
iTunes
.
For other DLNA compatible devices, launch the DLNA
compatible media software. For more details, refer to your
devices’ manual.
1
Press the WPS button on the wireless router
.
2
Press the POWER ON/STAND-BY button.
3
Press the NETWORK button.
4
Press the iPod MENU button on the remote control.
5
Press the
/
button to select
‘Wi-Fi Setup’
.
Press the ENTER button.
6
Press the
/
button to select
‘WPS’
. Press the ENTER
button. Wait until ‘
’ on the display stop blinking and the
display shows "
Successfully Connected to [network name]
".
7
On the iPod touch/iPhone/iPad, select
‘Settings’
-->
‘Wi-Fi’
.
On the PC/Mac, enter the list of available wireless networks.For
other DLNA compatible devices, turn on the Wi-Fi. For more
details, refer to your devices’ manual.
8
Select your router from the list of available networks. Enter your
network password if required.
9
Continue with step 8 to 9 in
‘Direct wireless connection’
.
Note:
WPS process (network search) takes about 2 minutes. If
fail to connect, the display will show
‘
Cannot connect to
Network’
. Repeat step 4 to retry.
1
Press the POWER ON/STAND-BY button.
2
Press the NETWORK button on the remote control.
3
Press the iPod MENU button on the remote control.
4
Press the
/
button to select ‘
Wi-Fi Setup
’.
Press the ENTER button.
5
Press the
/
button to select ‘
SSID Set
’. Press the
ENTER button. Wait until the display shows “
SSID
Ready
” which takes about 40 seconds.
6
On the iPod touch/iPhone/iPad, select ‘
Settings
’ -->
‘
Wi-Fi
’. On the PC/Mac, enter the list of available
wireless networks.
For other DLNA compatible devices, turn on the Wi-Fi.
For more details, refer to your devices’ manual.
7
Select
Sharp_DK-KP95
from the list of available
networks.
8
Open web browser as Safari or Explorer on iPod touch /
iPhone / iPad or PC/Mac. Type
192.16
8
.1.1
at the
address bar.
The DK-KP95 configuration page is displayed
.
9
Select
Network Configuration
tab.
10
Select your router SSID from the pull-down list of
Service Set ID (SSID)
.
Wi-Fi network Setup for AirPlay / DLNA (continued)
■
Direct wireless connection
9
Tap / click on the
AirPlay
icon
.
Select the speaker :
SHARP_DK-KP95_xxxxxx
.
Sound will be heard from the DK-KP95 speakers via
audio streaming
.
Note:
‘xxxxxx’ is MAC ID.
■
Connection via wireless router with WPS
Wi-Fi
S
HARP_DK-KP95
S
HARP_DK-KP95_xxxxxx
WPS
■
Connection via SSID (wireless router without WPS)
SHARP DK-KP95
Network Config
u
r
a
tion
192.16
8
.1.1