background image

E-6

Note:

When navigating the iPod, iPhone or iPad menu with remote
control, do not operate any of the buttons on the iPod or
iPhone unit. The volume level is adjusted by pressing the VOL
(+ or –) button on the main unit or the remote control.
Adjusting the volume on the iPod, iPhone or iPad units give no
effect.

iPod, iPhone and iPad operations:

The operations described below depend on the generation
iPod, iPhone and iPad you are using.

System on operation:

When the main unit is powered on, the iPod, iPhone or iPad
units will automatically power on when docked or connected
in the unit.

System off (stand-by operation):

When the main unit is turned to stand-by mode, the docked
iPod, iPhone or connected iPad unit will automatically turn to
stand-by mode.

Simply remove the iPod or iPhone from the docking station or
iPad connector from USB terminal. It is safe to do so even
during playback.

Caution:

Unplug all accessories for the iPod or iPhone before
inserting it into the docking station.

Stop button ( ) at main unit is invalid during iPod function.

Listening to the iPod, iPhone or iPad (continued)

iPod or iPhone playback

1

Press the POWER ON/STAND-BY button to turn the power on.

2

Press the iPod button on the remote control or FUNCTION
button repeatedly on the main unit to select iPod function.

3

Insert iPod or iPhone unit into the dock of main unit.  “DOCK
OK” will appear.

4

Press the  /  (iPod  / ) button to start playback.

Navigating the iPod,  iPhone or iPad menus

1

Press the iPod MENU button to view the menu on iPod,
iPhone or iPad unit. Press it again to go back to previous
menu.

2

Use the PRESET (

 or 

) button to select an item on the

menu and then press ENTER button.

To disconnect iPod, iPhone or iPad

Various iPod, iPhone and iPad functions

Function Main unit

Remote control

Operation

Dock/USB

Dock

USB

Play

Press in the pause 
mode.

Pause

Press in the playback 
mode.

Track up/ 
down

Press in the playback 
or pause mode. 
If you press the 
button in the pause 
mode, press the  /

 button to start the 

desired track.

Fast 
forward/ 
reverse

Press and hold down 
in the playback 
mode.

Release the button to 
resume playback.

Repeat

____ 

Press to toggle 
repeat mode.

Shuffle

Press and hold to 
toggle shuffle mode.

Menu

____ 

Press to view the iPod 
menu during iPod 
function.

Enter

____ 

Press to confirm the 
selection.

Cursor
Up/Down

____ 

Press to select the 
iPod menu.

Содержание DK-KP95P

















Отзывы: