Sharp AR-D13 Скачать руководство пользователя страница 8

Страница: 8 / 44

AR-D13/D14/MU1/DC1 UNPACKING AND INSTALLATION-4

<2>Pull out the upper paper tray of the stand/paper drawer until it stops

and attach the front mounting plates with two supplied screws.

Then, remove the lock of the paper tray and close the tray.

Remove the locks of the middle tray and the lower tray similarly.

<3>Reattach the paper tray of the main unit.

5) Remove the rear cabinet of the stand/paper drawer and remove the

AC inlet cover.

<1>Remove the four screws that fix the rear cabinet and then remove the

rear cabinet.

<2>Remove the screw that fixes the AC inlet cover and then remove the

AC inlet cover.

<3>Process the AC inlet cover as shown in the illustration.

6) Attach the power supply unit.

Attach the power supply unit to the positioning portion of the multi

purpose drawer and then fix it with three supplied screws.

7) Connect the power supply unit harness to the PCU PWB of the main

unit of the printer.

<1>Remove the screw that fixes the harness cover of the main unit of the

printer and slide the harness cover up to remove it.

Process the harness cover as shown in the illustration.

<2>Connect the optional power supply harness connector to CN11 (red

connector) of the PCU PWB of the main unit of the printer.

<3>Reattach the harness cover to its original position and fix it with the

removed screw.
At this time, ensure that the optional power supply unit harness is

arranged as shown in the illustration.

•Fix the harness securely to the wire saddle.

Screw

Front
mounting plate

Front mounting
plate

Rear cabinet

AC inlet cover

Cut out.

Power supply unit

Screws

Harness cover

Cut out.

Screw

Connector

CN11

Wire saddle

Harness cover

Optional power
supply harness

Screw

Wire saddle

Содержание AR-D13













































Результаты поиска

Содержание AR-D13

Отзывы:

Похожие инструкции для AR-D13

Бренды по названию

Популярные бренды

Sharp AR-D13, Руководство по обслуживанию

Результаты поиска

Содержание AR-D13

Отзывы:

Похожие инструкции для AR-D13

Бренды по названию

Популярные бренды