Sharp AR-D13 Скачать руководство пользователя страница 9

Страница: 9 / 44

AR-D13/D14/MU1/DC1 UNPACKING AND INSTALLATION-5

8) Connect the relay harness of the stand/paper drawer to the power

supply unit.

Connect the relay harness of the stand/paper drawer to the

connector of the power supply unit.

9) Attach the rear cabinet of the stand/paper drawer.
<1>Pass the cord of the power supply unit through the hole of the rear

cabinet and attach the rear cabinet to the stand/paper drawer.

<2>Attach the AC inlet cover to the rear cabinet of the stand/paper

drawer and fix it with the removed screw.

10) Connect the AC cord of the power supply unit to the main unit of the

printer.

Connect the AC cord of the power supply unit to the inlet connector

of the main unit of the printer at the location shown in the illustration.

11) Adjust the position of the paper guides of the upper paper tray of the

stand/paper drawer.

Refer to "Setting and adjustment" described later.

3.AR-MU1

<Before installation>

•When installing AR-MS1, if you install a finisher or mail-bin stacker

together, a power supply unit (AR-DC1) is needed.

1) Turn off the main switch of the main unit of the printer.

Turn the main switch located on the front side of the main unit to the
"OFF" position.

Then, remove the power plug of the main unit from the outlet.

2) Put the main unit of the printer on the multi purpose drawer.

<1>Pull out the paper tray of the main unit until it stops and then remove

it by lifting both ends of the tray.

<2>Hold the main unit of the printer at the positions shown in the

illustration and put the main unit on the multi purpose drawer so that
the front side and the left side of the main unit are aligned to those of

the multi purpose drawer.

3) Connect the main unit of the printer to the multi purpose drawer.

<1>Attach the rear mounting plates with two supplied screws.

Connector of the power supply connector

Relay harness of the
stand/paper drawer

Rear cabinet

Screw

AC inlet cover

AC cord

<Parts included>

Front mounting plates: 2 pcs.

Rear mounting plates: 2 pcs.

Screws: 4 pcs.

Front side

Rear side

Rear mounting
plate

Rear mounting plate

Screw

Содержание AR-D13













































Результаты поиска

Содержание AR-D13

Отзывы:

Похожие инструкции для AR-D13

Бренды по названию

Популярные бренды

Sharp AR-D13, Руководство по обслуживанию

Результаты поиска

Содержание AR-D13

Отзывы:

Похожие инструкции для AR-D13

Бренды по названию

Популярные бренды