Sharp AR-D13 Скачать руководство пользователя страница 5

Страница: 5 / 44

AR-D13/D14/MU1/DC1 UNPACKING AND INSTALLATION-1

[4] UNPACKING AND INSTALLATION

1.AR-D13

<Before installation>

•For installation, a power supply unit (AR-DC1) is needed.

1) Turn off the main switch of the main unit of the printer.

Turn the main switch located on the front side of the printer to the

"OFF" position.
Then remove the power plug from the outlet.

2) Attach the adjusters and adjust them.

<1>Insert the left adjusters to the stand/paper drawer.

<2>Turn the five adjusters to lower them until they touch the floor.
<3>Attach the four adjuster covers.

3) Put the main unit of the printer on the stand/paper drawer.

<1>Pull out the paper tray of the main unit until it stops and then remove

it by lifting both ends of the tray.

<2>Hold the main unit of the printer at the positions shown in the

illustration and put the main unit on the stand/paper drawer so that

the front side and the left side of the main unit are aligned to those of

the stand/paper drawer.

4) Connect the main unit to the stand/paper drawer.
<1>Attach the rear mounting plates with two supplied screws.

<2>Pull out the upper paper tray of the stand/paper drawer until it stops

and attach the front mounting plates with two supplied screws.
Then, remove the lock of the paper tray and close the tray.

<3>Reattach the paper tray of the main unit.

<Parts included>

Left adjuster: 1 pc.

Front mounting
plates: 2 pcs.

Rear mounting
plates: 2 pcs.

Adjuster covers: 4 pcs.

Screws: 4 pcs.

Left paper guides: 2 pcs.

Right paper guides: 2 pcs.

"OFF"

Front side

Rear side

Rear mounting plate

Rear
mounting plate

Screw

Front
mounting plate

Front mounting
plate

Содержание AR-D13













































Результаты поиска

Содержание AR-D13

Отзывы:

Похожие инструкции для AR-D13

Бренды по названию

Популярные бренды

Sharp AR-D13, Руководство по обслуживанию

Результаты поиска

Содержание AR-D13

Отзывы:

Похожие инструкции для AR-D13

Бренды по названию

Популярные бренды