Sharp AR-D13 Скачать руководство пользователя страница 10

Страница: 10 / 44

AR-D13/D14/MU1/DC1 UNPACKING AND INSTALLATION-6

<2>Pull out the paper tray of the multi purpose drawer until it stops and

attach the front mounting plates with two supplied screws.

Then, remove the lock of the paper tray and close the tray.

<3>Reattach the paper tray of the main unit of the printer.

4) Connect the harness to the main unit of the printer.
<1>Remove the screw that fixes the harness cover of the main unit of the

printer and then slide the harness cover up to remove it.

Process the harness cover as shown in the illustration.

<2>Connect the connector of the relay harness of the multi purpose

drawer to the connector of the PCU PWB of the main unit of the

printer.

If you do not install a finisher, saddle stitch finisher or mail-bin stacker,
the steps below are not needed. Proceed to step 10).

5) Remove the rear cabinet of the multi purpose drawer.
<1>Remove the two screws that fix the rear cabinet of the multi purpose

drawer and then remove the rear cabinet.

<2>Remove the screw that fixes the AC inlet cover and then remove the

AC inlet cover.

Process the AC inlet cover as shown in the illustration.

6) Attach the power supply unit.

Attach the power supply unit to the positioning portion of the multi
purpose drawer and then fix it with three supplied screws.

7) Connect the power supply unit harness to the PCU PWB of the main

unit of the printer.

Connect the power supply harness connector to CN11 (red

connector) of the PCU PWB of the main unit of the printer.

Screw

Front mounting plate

Front
mounting plate

Harness cover

Cut out.

Screw

Connector

Rear cabinet

Screw

AC inlet cover

Cut out.

Optional power supply unit

Screws

CN11

Connector

Содержание AR-D13













































Результаты поиска

Содержание AR-D13

Отзывы:

Похожие инструкции для AR-D13

Бренды по названию

Популярные бренды

Sharp AR-D13, Руководство по обслуживанию

Результаты поиска

Содержание AR-D13

Отзывы:

Похожие инструкции для AR-D13

Бренды по названию

Популярные бренды