
Main
Sub
Item
Content
Adjustment
code
code
range
07
04
Warm-up
disabled.
[Content] 1. The warm-up is disabled. The optical system is initialized and shaded.The
warm-up is disabled, but the fusing temperature control is performed.
2. The same applies to Door open clear/JAM clear/Economy mode return.
If the [PRINT] key is pressed after entering a sub code, the copier exits the
simulation mode and initializes and shades the optical system. After the opera-
tions, the copier becomes the copy ready state, which allows the copier to make
copies in the ordinary manner. (Before copying the first sheet of paper, the
process controller is activated.)
Although the warm-up is disabled, the fusing temperature control is performed.
Therefore, if the temperature of the fusing section is too low, the copier may sense
low-temperature trouble, indicating “H4” on the display.
To clear this mode:
1. Turn OFF/ON the main switch (on the left-hand side of the copier)
2. Enter the simulation mode and press the [CA] to exit the simulation mode.
06
Intermittent
aging.
[Content] 1. Intermittent aging test (with alert for paper misfeed) can be performed
repeatedly by the preset number of copies.
If the [PRINT] key is pressed after entering a sub code, the copier exits the
simulation mode and warms up the copier. After warming up, the copier becomes
the copy ready state. If the [PRINT] key is pressed after entering the number of
copies you want to make, the preset number of copies are made. After copying,
the copier becomes the ready state. Three second later, the copier automatically
starts copying again.
To clear the aging mode:
1. Turn OFF/ON the main switch (on the left-hand side of the copier)
2. Enter the simulation mode and press the [CA] to exit the simulation mode.
07
Intermittent
aging without
alert for paper
misfeed.
[Content] 1. Intermittent aging test (without alert for paper misfeed) can be performed
repeatedly by the preset number of copies.
If the [PRINT] key is pressed after entering a sub code, the copier exits the
simulation mode and warms up the copier. After warming up, the copier becomes
the copy ready state. If the [PRINT] key is pressed after entering the number of
copies you want to make, the preset number of copies are made. After copying,
the copier becomes the ready state. Three second later, the copier automatically
starts copying again, without alert for paper misfeed.
To clear the aging mode:
1. Turn OFF/ON the main switch (on the left-hand side of the copier)
2. Enter the simulation mode and press the [CA] to exit the simulation mode.
08
Displays
warm-up time
(without aging).
[Content] 1. The warm-up time can be checked.
If the [PRINT] key is pressed after entering a sub code, the copier exits the
simulation mode and warms up the copier. At this time, the warm-up time is
displayed on the multiple display unit. The display counts up by seconds after the
start of warming up and stops counting up when warming up is terminated.
When the [CA] key is pressed, the multiple display unit is reset to zero.
To clear this mode:
1. Turn OFF/ON the main switch (on the left-hand side of the copier)
2. Enter the simulation mode and press the [CA] to exit the simulation mode.
9 – 23