91
Information for Customers
on environmentally friendly disposal of this SHARP product
If this product cannot be used any more, it should be disposed of in a legally correct and environmentally sound way.
DO NOT DISPOSE OF THIS PRODUCT WITH YOUR HOUSEHOLD WASTE
OR MIXED WITH OTHER WASTES! YOU MIGHT ENDANGER THE ENVIRONMENT!
Sharp Corporation is committed to protecting the environment and conserving energy. Our goal is to minimize the
environmental impact of our products by continually implementing and improving product technologies, designs, and
customer information aimed at environmental conservation.
(1) For our customers in Belgium, The Netherlands, Sweden, and Switzerland
SHARP takes part in the respective national recycling systems for electronic equipment, which have been founded on the
base of the environmental laws in these countries.
Please see here details on the respective countries.
Country
Recycling Information for that Country
Sweden
The Netherlands
Belgium
Switzerland
Please use the Swedish electronics recycling system called “ELRETUR”,
and see the website at http://www.el-kretsen.se
Please use the Dutch electronics recycling system called “ICT-Milieu”.
and see the website at http://www.nederlandict.nl/index.php
Please use the Belgian electronics recycling system called “Recupel”.
and see the website at http://www.recupel.be
Please use the Swiss electronics recycling system called “SWICO”.
and see the website at http://www.swico.ch
(2) For our customers in United Kingdom, Germany, France, and Italy
Please contact your local authorities for collection and recycling facilities, or contact a recycling service company, which is
licensed for the recycling of electronic equipment.
HOW TO SET THE FACTORY PRESETS
Turn off the Display by pressing
MAIN POWER
.
Press and hold down
RESET
on the AVC System and press
MAIN POWER
on the Display to turn on the
System.
All setting items (except TV channel) return to the factory presetting.
NOTE
• Running the factory presetting operation also reset the PIN to the factory preset “1234”.
You can run the Auto Installation again by using the following steps.
1
Turn on the power of the Display and the AVC System.
2
Press
MENU
. (Make sure the menu screen displays.)
3
Press
c
/
d
to select “Setup”.
4
Press
a
/
b
to select “Auto Installation”, and then press
OK
.
5
The PIN setting screen displays, you need to enter the factory preset PIN “1234”.
6
Press
c
/
d
to select “Yes”, and then press
OK
.
NOTE
• As a precautionary measure, make a note of your PIN above, scissor it from this manual, and keep it in a familiar place.
The PIN is
.
LC-32GD1E(E)-l
04.4.6, 1:57 PM
91
