Sharp Actius PC-MV10 Скачать руководство пользователя страница 73

Страница: 73 / 144

4-4

Inserting and Removing a Floppy Disk

Inserting

Hold the floppy disk with the arrow facing up and towards the drive. Slide the disk
into the drive until it locks into place.

•

Always insert a floppy disk straight into the floppy disk drive.

•

When inserting the disk, make sure it is not upside down.

•

Do not use excessive force when inserting the floppy disk. If you have
difficulty inserting or removing disks, seek the assistance of an
authorized service technician.

•

Do not touch the disk while reading/writing data. It may cause
malfunction of the computer and the drive.

Removing

Before removing the floppy disk, make sure the indicator of the floppy
disk drive unit is not lit.

Press the eject button firmly. The disk will pop out slightly. Remove it and store it
properly.

Indicator

Arrow Facing Up

Содержание Actius PC-MV10

















































































































































Результаты поиска

Содержание Actius PC-MV10

Отзывы:

Sharp Actius PC-MV10, Руководство по эксплуатации, Страница: 73 / 144

Результаты поиска

Содержание Actius PC-MV10

Отзывы: