10
Preparation
Protection against overturning
There is a danger of the product overturning in the case of a disaster or sudden collision. Carry out the following
tip-resistant measurement for your safety.
Place the TV on the table.
1
2
1
Use the 2 screws (supplied) to attach the 2
clamps (supplied) to the rear of the TV.
Attach the TV to the wall using extra strong
ties (commercially available).
Pull the attached restraining bracket out so
that it is at a 90 degrees angle.
Insert commercially available screws in the
holes of the restraining bracket and tighten the
screws to secure the TV to the table.
• Use commercially available screws of the proper
size to fi rmly secure the TV.
2
3
Anchoring the TV to the wall or a pillar
Fixing the TV to the table
View from the top
Cup hook (commercially available)
Tie (commercially available)
Screws for attaching clamps (supplied)
Clamps
(supplied)
1
2
n
o
p
Stand
Restraining bracket (attached)
Screws (commercially available)
CAUTION
•
As this product is heavy, use a table that is wide
enough to support the product and capable of
withstanding the product’s weight. The table should
be set where it will not be overturned.
• Be sure to use at least two people when moving the TV.
60X50H_en_ID5.indd 10
60X50H_en_ID5.indd 10
2011-6-13 17:19:53
2011-6-13 17:19:53
