Shark WV200EU, Инструкция по эксплуатации

Страница: 15 / 53

ENGLISH
MAINTENANCE
CLEANING THE FILTER
TROUBLESHOOTING
LIGHT INDICATOR WHAT IT MEANS
Light blinking blue Low battery.
Light blinks blue twice, then pauses
Blockage. Turn off power and
remove blockage, then turn
power back on.
Solid blue light
Power is on.
Blue light fades in and out steadily Unit is charging.
Dim blue light Unit is fully charged.
No light
Power is off, or unit needs to be
charged.
2
1. With the dust cup open and the power off, pinch both sides of
the filter housing and slide forward to remove.
2. Lift the filter by the metal ring to remove it from the housing.
To clean the fabric filter, tap to remove dust and large particles.
To deep clean, hand-wash only with lukewarm water and leave to
air-dry for 24 hours before reinstalling.
To clean the filter housing, make sure the filter is removed, then
hand-wash only with lukewarm water.
1
MAINTENANCE
CLEANING THE DUST CUP
1. With the dust cup open and the power off, slide the filter
housing forward to remove.
2.
Open the dust cup and press the release tab.
3. While pressing the tab towards the dust cup pull the dust cup
away from the unit. Handwash with lukewarm water only and
leave all parts to air-dry before reinstalling.
4. To reinstall, slide the dust cup tab into the slot on the bottom of
the nozzle until it clicks into place.
4
2
3
1
NOTE: Do not wash any part of this vacuum or its accessories in a
dishwasher.