ASSEMBLY
SETTINGS
CLEANING MODES
NOTE:
For deep cleaning per ASTM F 608 (embedded dirt in carpets) please use setting II, Carpet.
NOTE:
Select Carpet for stuck-on dust and debris.
NOTE:
All accessories are compatible with both the wand and the handheld vacuum.
Slide switch to the bottom
to turn off power. To begin
vacuuming, slide switch to
the appropriate setting.
Bare Floor/Small Area Rugs
The brushroll spins slowly
to clean bare floors and
small area rugs.
Carpet
The brushroll spins faster
to pick up debris below
the surface of your carpets.
OFF
SETTING I
SETTING II
To clean floors, step on floor nozzle
and tilt handheld vacuum back.
UPRIGHT
Detach the wand for more reach to clean
baseboards, ceiling fans, window sills, and other
hard-to-access areas. Stand the vacuum upright,
then step on the foot pedal of the floor nozzle and
pull the wand up to detach it.
ABOVE-FLOOR WITH WAND
Press the
Wand Release
button to lift the
handheld vacuum off the wand. Great for
cleaning stairs and furniture.
ABOVE-FLOOR HANDHELD
WAND
(Click)
1
2
1.
Insert
Wand
into
Floor Nozzle
.
2.
Insert
Handheld Vacuum
into wand.
Ensure all connections click securely into place.
(Click)
WHAT DOES THE BRUSHROLL INDICATOR LIGHT MEAN?
Solid Green:
The brushroll is spinning and working as it should.
Solid Red:
There is a jam in the brushroll area. Turn your vacuum off and remove any blockages
in the nozzle.
Flashing Red:
The motorized floor nozzle is overheating. Turn your vacuum off and wait a
minimum of 60 minutes for it to cool down.
INDICATOR LIGHT
BRUSHROLL INDICATOR LIGHT
sharkclean .com
sharkclean .com
