Shark GI460A Скачать руководство пользователя страница 6

TROUBLESHOOTING  

PROBLEM

POSSIBLE REASONS & SOLUTIONS

Garment 
Steamer/Iron does 
not heat

Pilot light
goes On and Off

Some odor or small 
particles come out 
of steam vents of 
new iron

Garment 
Steamer/Iron does 
not steam

Water droplets coming
from steam vents

Make sure that the plug is securely in the socket.

Temperature setting too low.  
Turn to higher setting.

This is normal.  

The light goes On and Off  as the thermostat is 
switching the heating element On and Off to 
maintain the selected temperature.

This is normal.  

Follow instructions for first use and allow iron to steam 
through 2-3 fillings & press the steam trigger 
occasionally to eliminate small white particles.

• 

Water tank may be empty or water level is very low. 

Add water.

• 

Make sure that the temperature control dial is correctly 

set.  For maximum steam,  (setting ‘Max’ on steam 
control), temperature control dial should be set on ‘•••’.

• 

Make sure the iron has reached the selected  

temperature by confirming that the pilot light has gone 
"Off". For more steam, turn temperature dial to 
higher setting, e.g. ‘•••’.

• 

If temperature setting is correct and there is no steam, 

gently  tap the soleplate on the ironing board a few 
times.  Move the temperature control dial from ‘MIN’ to 
‘Max’ a few times.

• 

Iron may not be hot enough.  Set temperature control 

dial to the ‘Max’ position. Always allow  iron sufficient 
time to heat up (pilot light goes off).

Overuse of steam trigger.  Allow more time between

each burst.

Iron may have been overfilled.  Turn iron off,empty

water and follow  instructions for filling.

Steam performance may be low if iron requires 

seasoning. To season, use regular tap water for 1or 2 
tanks until steam performance improves.

9

ONE (1) YEAR LIMITED WARRANTY

EURO-PRO Operating LLC 

warrants this product to be free from defects in material and 

 

workmanship for a period of one (1) year from the date of the original purchase, when utilized for 
normal household use, subject to the following conditions, exclusions and exceptions.

If your appliance fails to operate properly while in use under normal household conditions within 
the warranty period, return the complete appliance and accessories, freight prepaid. For Customer 
Service support, call 1 (800) 798-7398 or visit our website www.sharkcompany.com. 

If the appliance is found to be defective in material or workmanship, 

EURO-PRO Operating LLC 

will repair or replace it free of charge. Proof of purchase date and $ 9.95 to cover the cost of return 
shipping and handling must be included. *

The liability of 

EURO-PRO Operating LLC 

is limited solely to the cost of the repair or replacement 

of the unit at our option. This warranty does not cover normal wear of parts and does not apply to 
any unit that has been tampered with or used for commercial purposes. This limited warranty does 
not cover damage caused by misuse, abuse, negligent handling or damage due to faulty 

 

packaging or mishandling in transit.  This warranty does not cover damage or defects caused by 
or resulting from damages from shipping or repairs, service or alterations to the product or any of 
its parts, which have been performed by a repair person not authorized by 

EURO-PRO Operating 

LLC

This warranty is extended to the original purchaser of the unit and excludes all other legal and/or 
conventional warranties. The responsibility of 

EURO-PRO Operating LLC 

if any, is limited to the 

specific obligations expressly assumed by it under the terms of the limited warranty. 

In no event 

is 

EURO-PRO Operating LLC 

liable for incidental or consequential damages of any nature 

whatsoever. Some states do not permit the exclusion or limitation of incidental or consequential 
damages, so the above may not apply to you.

This warranty gives you specific legal rights, and you may also have other rights which vary from 
state to state or province to province. 

*Important: Carefully pack item to avoid damage in shipping. Be sure to include proof of 
purchase date and to attach tag to item before packing with your name, complete address 
and phone number with a note giving purchase information, model number and what you 
believe is the problem with item. We recommend you insure the package (as damage in 
shipping is not covered by your warranty). Mark the outside of your package “ATTENTION 
CUSTOMER SERVICE”. We are constantly striving to improve our products, therefore the 
specifications contained herein are subject to change without notice.

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

OWNERSHIP REGISTRATION CARD

FOR CANADIAN CONSUMERS ONLY

Model GI460A

Printed in China

10

Please complete and return within ten (10) days of purchase.  The registration will enable us to 
contact you in the event a product defect is discovered.  By returning this card you acknowledge 
to have read and understood the instructions for use, and warnings set forth in the accompanying 
instructions.

RETURN TO:

EURO-PRO Operating LLC, 4400 Bois Franc, St. Laurent, Quebec H4S 1A7

PURCHASER: ……………………………………………………………………………………………

ADDRESS: ……………………………………………………………………………………………….

DATE OF PURCHASE: …………………….. MODEL: ………………. SERIAL NO: .…………….

NAME AND ADDRESS OF STORE: …………………………………………………………………..

GI460A

Содержание GI460A

















Отзывы: