8
TOLL FREE: 1-800-798-7398
Maintenance
Replacing the Dust Bag:
1
Press the On/Off Button to the “Off” position.
2
Remove the flexible hose from the vacuum by
squeezing the locking tabs on the neck of the hose
and pulling it out. (
Fig. 14
)
3
Place your fingers underneath the opening
indentation behind the vacuum handle and lift the
top cover up. (
Fig. 15
)
4
Hold the cardboard collar of the dust bag and
gently pull the dust bag out. (
Fig. 16
)
5
Holding the cardboard collar, insert a new dust bag
into the slots of the dust bag holder. (
Fig. 17
)
Make sure that the dust bag is inserted FULLY into
the slots of the dust bag holder.
6
Close the top cover of the vacuum.
Cleaning Air Turbine Floor Nozzle:
1
Detach the air turbine floor nozzle from the end
of the telescopic tube. Turn it over and using your
thumb and index finger, squeeze the locking tabs
on either side of the turbine cover and lift off.
Remove any debris found inside (
Fig. 12
).
2
Inspect the rotating brush and carefully remove,
without damaging the bristles, any build-up of hair
or string wrapped around the rotating bristle brush
with scissors (
Fig. 13
).
Fig. 12
Fig. 14
Fig. 15
Fig. 16
Fig. 13