9
www.sharkclean.com
English
CAUTION:
To reduce the risk of shock, the power
cord must be disconnected before removing or
inserting the dust bag.
Cleaning the Pre-Motor Filter:
1
Press the On/Off Button to the “Off” position.
2
Open the top cover and pull the pre-motor filter
straight out. (
Fig. 18
)
3
Wash the filter in lukewarm water and allow to air
dry completely for 24 hours.
4
Slide a dry pre-motor into position between the
two posts and the motor intake.
Fig. 17
Fig. 18
To Reset the Motor Thermostat:
Your Shark
®
Professional Canister vacuum is equipped
with a protective Motor Thermostat. If the motor should
overheat, the thermostat shuts off the power.
1
Press the Power Button to turn the unit “
Off
”.
2
Unplug the vacuum.
3
Check for clogged hose or filter; unclog hose and
replace filter.
4
Wait 45 minutes for vacuum to cool; then plug in
the vacuum.
5
Press the Power Switch to start the vacuum.
Note:
If vacuum still does not start, contact Customer
Service at: 1-800-798-7398.
