5
www.sharkclean.com
English
1
To extend the power cord, pull it from the rear
of the vacuum to the desired length (
Fig. 3
). A
yellow mark on the power cord shows the ideal
cable length.
CAUTION
: DO NOT pull the power cord beyond
the red mark on the power cord as this will
damage the cord.
2
Plug the vacuum into an electrical wall outlet.
3
Press the On/Off Button to the “On” position to
begin. (
Fig. 4
)
4
Press the On/Off Button to the “Off” position
when finished using the vacuum.
Using the Vacuum
5
To retract the power cord, press the cord rewind
button. (
Fig. 5
) If the cord does not fully retract,
pull it out a little and then press the rewind button
again.
WARNING
: Always hold the plug and
DO NOT
allow to whip when rewinding.
6
To store the canister vacuum, insert the clip that is
on the back of the air turbine floor nozzle or floor
brush into the slot on the back of the vacuum.
(
Fig. 6
)
Fig. 3
Fig. 4
Fig. 6
Fig. 5
