sharkclean .com/AI RobotS E
sharkclean .com/AI RobotS E
WARNING
To reduce the risk of fire, electric shock, injury, or property damage:
LASER WARNING
THIS PRODUCT HAS A CLASS 1 LASER. IT IS SAFE UNDER REASONABLY FORESEEABLE
CONDITIONS (AS DEFINED IN THESE INSTRUCTIONS.) ALWAYS TURN OFF THE POWER
BEFORE LIFTING THE ROBOTIC VACUUM CLEANER OR PERFORMING ANY MAINTENANCE
ON IT. DO NOT LOOK DIRECTLY INTO LASER.
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY
If the charging cable plug does not fit fully into the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician. DO NOT force into outlet or try to modify to fit.
GENERAL WARNINGS
When using an electrical appliance, basic
precautions should always be followed,
including the following:
1.
The robotic vacuum cleaner system
consists of a robotic vacuum and
charging base with power supply.
These components contain electrical
connections, electrical wiring, and moving
parts that potentially present risk to the
user.
2.
Before each use, carefully inspect all parts
for any damage. If a part is damaged,
discontinue use.
3.
Use only identical replacement parts.
4.
This robotic vacuum cleaner contains no
serviceable parts.
5.
Use only as described in this Owner's
Guide.
DO NOT
use the robotic vacuum
cleaner for any purpose other than those
described in this Owner's Guide.
6.
With the exception of filters, DO NOT
expose any parts of the robotic vacuum
cleaner to water or other liquids.
7
.
DO NOT
put hands into any
opening in the base or robot.
USE WARNINGS
8.
For your robot’s cliff sensors to work
properly, all runners, rugs, or carpets must
be eight inches from any stairs (or must
be continuous and extend over the edge
of the stairs). If a runner, rug, or carpet
edge that is less than eight inches from
the stairs cannot be moved, you must use
a digital no-go zone to block off the stairs.
For non-app users, use a boundary to
block off an unsafe boundary.
9.
To minimize the risk of the robot traveling
beyond an unsafe boundary (stair/cliff
edges, fireplaces, water hazards), establish
these areas as “no-go zones” using the
mapping feature in the SharkClean™
mobile app. Upon setting the boundary,
run the vacuum and visually confirm that
the settings effectively prevent the robot
from passing beyond the set boundary.
Adjust settings as necessary.
10.
This product has a Class 1 Laser. It is safe
under reasonably foreseeable conditions
(as defined in this Owner's Guide). Always
turn off the power before lifting the
robotic vacuum cleaner or performing any
maintenance on it.
11. DO NOT
look directly into laser.
12.
Always turn off the robotic vacuum
cleaner before inserting or removing the
filter or dust bin.
13. DO NOT
handle plug, charging base,
charging cable, or robotic vacuum
cleaner with wet hands. Cleaning and
user maintenance shall not be made by
children without supervision.
14. DO NOT
use without robot dust bin and
filters in place.
15. DO NOT
damage the charging cord:
a)
DO NOT
pull or carry charging base
by the cord or use the cord as a
handle.
b)
DO NOT
unplug by pulling on cord.
Grasp the plug, not the cord.
c)
DO NOT
close a door on the cord,
pull the cord around sharp corners,
or leave the cord near heated
surfaces.
16. DO NOT
put any objects into nozzle or
accessory openings.
DO NOT
use with any
opening blocked; keep free of dust, lint,
hair, and anything that may reduce airflow.
17. DO NOT
use robotic vacuum cleaner
if airflow is restricted. If the air paths
become blocked, turn the vacuum cleaner
off and remove all obstructions before
turning on the unit again.
SAVE THESE INSTRUCTIONS
For the latest warnings and cautions, go to
sharkclean.com/AIRobotSE
18.
Keep nozzle and all vacuum openings
away from hair, face, fingers, uncovered
feet, or loose clothing.
19. DO NOT
use if robotic vacuum cleaner
is not working as it should, or has been
dropped, damaged, left outdoors, or
dropped into water.
20. DO NOT
place vacuum cleaner on
unstable surfaces.
21. DO NOT
use to pick up:
a) Liquids.
b) Large objects.
c) Hard or sharp objects (glass, nails,
screws, or coins).
d) Large quantities of dust (drywall
dust, fireplace ash, or embers.)
e)
DO NOT
use as an attachment to
power tools for dust collection.
f) Smoking or burning objects (hot
coals, cigarette butts, or matches).
g) Flammable or combustible materials
(lighter fluid, gasoline, or kerosene).
h) Toxic materials (chlorine bleach,
ammonia, or drain cleaner).
i) Toxic materials (high concentrations
of chlorine bleach liquid, high
concentrations of ammonia, or drain
cleaning solution).
22. DO NOT
use in the following areas:
a) Wet or damp surfaces.
b) Outdoor areas near fireplaces with
unobstructed entrances.
c) Spaces that are enclosed and may
contain explosive or toxic fumes
or vapors (lighter fluid, gasoline,
kerosene, paint, paint thinners,
mothproofing substances, or
flammable dust.)
d) In an area with a space heater.
e) Near fireplaces with unobstructed
entrances.
23.
Turn off the robotic vacuum cleaner before
any adjustment, cleaning, maintenance, or
troubleshooting.
24.
Allow all filters to air-dry completely
before reinstalling them to prevent liquid
from being drawn into electric parts.
25. DO NOT
modify or attempt to repair the
robotic vacuum cleaner or the battery
yourself, except as indicated in this
Owner's Guide.
DO NOT
use the vacuum if
it has been modified or damaged.
26. DO NOT
use any household cleaners
(all-purpose cleaners, glass cleaners,
bleach) on any of the polished high gloss
surfaces on the base or robot vacuum
cleaner as they contain chemicals that
may damage these surfaces. Instead, use
a cloth dampened with water to gently
clean.
BATTERY USE
27.
The battery is the power source for the
vacuum. Carefully read and follow all
charging instructions.
28.
To prevent unintentional starting, ensure
the vacuum is powered off before picking
it up or carrying it.
DO NOT
carry the
appliance with your finger on the power
switch.
29.
For SHARK AI ROBOT SELF-EMPTY™
XL base replacement, use XDKRV2500.
For SHARK AI ROBOT SELF-EMPTY™
base replacement, use XDKRV2500S. For
replacement battery, use RVBAT850.
30.
Keep the battery away from all metal
objects such as paper clips, coins, keys,
nails, or screws. Shorting the battery
terminals together increases the risk of fire
or burns.
31.
Under abusive conditions, liquids may be
ejected from the battery. Avoid contact
with this liquid, as it may cause irritation or
burns. If contact occurs, flush with water. If
liquid contacts eyes, seek medical help.
32.
Robotic vacuum cleaner should not be
stored, charged, or used at temperatures
below 50°F (10°C) or above 104°F
(40°C). Ensure the battery and vacuum
have reached room temperature before
charging or use. Exposing the robot or
battery to temperatures outside of this
range may damage the battery and
increase the risk of fire.
33. DO NOT
expose the robotic vacuum
cleaner or battery to fire or temperatures
above 265°F (130°C) as it may cause
explosion.
