28
Product Version 1.0 | Revision E | Released 2022-12-09
LED ENGINE
The P-6 Series is a fixture with 24 high-power RGBW and white LEDs, divided into 6 individually controllable seg-
ments, which generates wide-ranging color effects and pixel-mapping combinations for creative lighting designs.
Color temperature correction
The P-6 Series offers seamless CTC (color temperature correction) control from 2000° Kelvin - 10000° Kelvin.
Ultra high-speed strobe effect
The ultra high-speed strobe effect generates random strobe and pulse effects with variable speed.
Beam angle
The standard P-6 offers a native 10º beam angle that can be modified using different optional magnetic holographic
filter frames and barndoors; the P-6 POI offers 10º and 35º native beam angle.
INDIVIDUAL FIXTURE SETTINGS
Setting the dimming curve
Setting the dimming curve will determine the fixture’s behaviour, when changing the light intensity between 0% -
100%.
Linear control provides uniform adjustment throughout the control action, whereas gamma corrected dimming pro-
vides finer control at low light levels, where the eye is more sensitive to change. By default, the i-6 uses gamma cor-
rected dimming. For a uniform response, set all fixtures to the same dimming curve.
Flipping the OLED display (POI n.a.)
If the fixture is installed hanging upside down, it might be useful to flip the display so that it is easier to read.
To flip the display, press ENTER and select SETTINGS → FLIP DISPLAY, or press the up and down buttons on the control
panel at the same time.
Setting the OLED display saver (POI n.a.)
By default, the OLED display dims down after a short period when the control panel is not in use. The display can also
be set to turn off completely, ideal when a pitch-black environment is required. Pressing any key will always turn on
the display or restore it to normal brightness.
To configure the display settings, press ENTER → SETTINGS → DISPLAY SAVER.
PLEASE NOTE! TO AVOID THE RISK OF DISPLAY DETERIORATION CAUSED BY LONG TERM USE, IT IS RECOM-
MENDED TO SELECT THE SETTING → DISPLAY OFF.
Setting the fan mode
For operating environments where low-noise is a requirement, or where the fixture will be operating at high tempera-
tures, it is possible to adjust the default fan speed by going to SETTINGS → FAN MODE in the menu.
PLEASE NOTE! IN POI VERSION, FAN MODE ADJUSTMENT IS POSSIBLE THROUGH RDM.
FIXTURE PROPERTIES
FACTORY DEFAULT
• Set DMX address to 1
• Set 6 Channel CTC DMX mode
• Set screensaver to Dimmed
• Set flip screen to not-flipped
• Disable Startup Programs
• Set all Quick Color values to zero
• Disable DMX Loss
• Disable Fast Speed mode
• Set all values in Manual Programs to zero
• Set Fan mode to Standard
• Disabled Keypad Lock
• Set Wireless Priority to DMX
• Set Custom Frequency to Default