24
Product Version 1.0 | Revision E | Released 2022-12-09
USER INTERFACE
The fixture can be set up by using the control panel and OLED multi-line display on fixture’s head or through RDM.
PLEASE NOTE! IN POI VERSIONS THE DISPLAY IS REPLACED BY AN INDICATOR LIGHT. THE ADJUSTMENTS ARE
MADE THROUGH RDM. SEE “
POI PERMANENT OUTDOOR INSTALLATION
” FOR MORE INFORMATION.
The OLED display shows the current status and menu of the fixture. It is used to configure individual fixture settings
and read error messages. The complete list of the menu and all commands available are listed in “
”.
Before turning on the fixture, make sure the power cable is properly connected. When the fixture is powered on it will
boot and reset before displaying the selected operating mode and DMX start address. Navigate through the menus
and options using the arrow buttons, and select items using the ENTER button.
Lorem ipsum dolor sit
6CH CTC MODE
101
(107)
DMX
ESC
ENTER
Figure 19: OLED display and control panel
USING THE DISPLAY PANEL
• Press the ‘ENTER’ button to access the menu or make a selection.
• Press the arrow buttons to scroll up and down in the menus.
• Press the ‘ESC’ button to take a step back in the menu.
SHORTCUTS
• ESC + ENTER: Press ENTER to confirm factory defaults.
• ESC + UP: Press ENTER to start LED test.
• UP + DOWN arrows simultaneously = flip the display upside-down.
• ENTER + DOWN (hold down for 10 sec): Keypad unlock