- 18 -
5-3. Simulation Calibration Mode(without Test weight)
With this “Simulation Calibration Mode” you can make simple calibration without any “TEST weight”
This calibration mode uses “Load cells’ max capacity” and “Max Output Rate(mV)”, so the weight
adjustment degree might be less than “Test weight Calibration”.
The guaranteed resolution of this “Simulation Calibration” is 1/3,000.
5-3-1.
Simulation Calibration Mode Start
On pressing
key for 4 seconds
On the screen “
----
“, input
PASSWORD
press
key
On the screen
“SET.CAL”
press
key
On the screen “CALIBR“, press
key
Go into CALIBRATION MODE
