background image

4

For your safety *

For your safety *

For your safety *

For your safety *

For your safety *

The law governing technical equipment (the Law on the Safety of Appliances)
of 24.06.1968 (BGBl.I, page 717) as amended by the Amendment Law of
13.08.1979 (BGBl.I, page 1432) requires the following matters to be drawn
to your attention:

Comply with the Operating Instructions.

Comply with the Operating Instructions.

Comply with the Operating Instructions.

Comply with the Operating Instructions.

Comply with the Operating Instructions.

Before operating or adjusting the appliance you must be thoroughly familiar
with this operating manual. You must comply with it in every respect.

The appliance is designed only for the application described and for
industrial (commercial) use.

Liability for Function or Damage

Liability for Function or Damage

Liability for Function or Damage

Liability for Function or Damage

Liability for Function or Damage

Liability for the functioning of the appliance passes to the owner or operator
in all cases in which the appliance has been improperly maintained or
repaired by persons not associated with SEWERIN Service or if it has been
used for a purpose not in accordance with its designated application.

You should therefore always use original SEWERIN accessories with the

EX-TEC® SNOOPER H

.

Hermann Sewerin GmbH accepts no responsibility for damage due to a
failure to comply with the foregoing instructions. The guarantee and liability
terms of the Hermann Sewerin GmbH terms of sale and supply are not
extended by the foregoing.

We reserve the right to make technical changes in the course of continued
development.

HERMANN SEWERIN GMBH

*

All references  to laws, statutes and norms relate to the legislation of the Federal Republic of
Germany.

Содержание EX-TEC SNOOPER H




































Отзывы: